Zum Inhalt springen
Eltracore

ELKO EP

RFTC-10/G

Herstellernummer
EAN
Preis auf AnfrageFragen Sie ein Angebot für dieses Produkt an.

Bestellung

Bestelleinheit
Stück

Beschreibung

The simple controller in design LOGUS 90 measures the room temperature by internal sensor, and based on the set temperature, it sends a command to control heating. DESCRIPTION The temperature controller can be used in one of two ways: a) For controlling an additional heat source (heater, oil radiator, radiant panel) with multi-function switching units RFSA-6x, RFUS-61 or RFSC-61. b) For sufficient temperature correction ( +/- 10 °C ) over the course of the program set in the system unit (change in temperature applies until the following set change of the heating program in the system unit). The backlit LCD display displays the current and set temperature, status (ON/OFF), battery status, etc. Manual control with using buttons on the device. Sends the measured temperature to the system unit in regular 5-min. intervals. It sends a signal upon sudden temperature change. Color combination of temperature unit in design of frames LOGUS 90 (plastic, glass, wood, metal, stone). The flat rear side of the device enables its placement anywhere in the room where you wish to measure temperature. TECHNICAL PARAMETERS Battery power 2x AAA (1,5 V), with battery life of around 1 year based on frequency of use. Range of measured temperature 0 - 55 °C. Range up to 100 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20. Communication frequency (868MHz, 866MHz, 916MHz, 922MHz) with bidirectional protocol RFIO or RFIO2. RFIO2 is an innovative iNELS RF Control wireless communication protocol, which brings you greater stability and eliminates signal collision between individual components. In the design of the switch with mounting into the installation box.

Technische Daten

ETIM-Klasse: Bussystem-Raumtemperaturregler (EC001101)

Communication

Bussystem KNX
Nein
Bussystem KNX-Funk
Nein
Bussystem Funkbus
Nein
Bussystem LON
Nein
Bussystem Powernet
Nein
Andere Bussysteme
ohne

Options

Funk bidirektional
Ja
Präsenztaster
Nein
Parallel-Betrieb möglich
Ja

Model/type

Zusammenstellung
Basiselement mit Komplettgehäuse
Mit Vor-Ort Bedienung
Ja
Mit Diebstahl-/Demontageschutz
Nein
Mit LED-Anzeige
Nein
Mit Display
Ja

Mounting/installation

Montageart
Aufputz
Anzahl der binären Eingänge
0
Externe Fühler
false

Material

Werkstoff
Kunststoff
Werkstoffgüte
sonstige
Oberfläche
sonstige
Ausführung der Oberfläche
matt

Colour

Farbe
weiß
RAL-Nummer (ähnlich)
9003
Transparent
Nein

Setting/control

Manuelle Sollwertverstellung
Ja
Klasse des Temperaturreglers
UN

Protection

Schutzart (IP)
IP20

Connection

Busankopplung inklusive
Nein

Electrical

Leistungsaufnahme im Bereitschaftszustand (solstandby)
UN W

Measurements

Min. Tiefe der Gerätedose
UN mm