Zum Inhalt springen
Eltracore

Jung

KNX Multistation, REG, 4 TE

Herstellernummer
EAN
Preis auf AnfrageFragen Sie ein Angebot für dieses Produkt an.

Bestellung

Bestelleinheit
Stück

Beschreibung

REG-Gehäuse 4 TE Bestimmungsgemäßer Gebrauch Schalten elektrischer Verbraucher mit potentialfreien Kontakten Schalten elektrisch betriebener Jalousien, Rollläden und Markisen Schalten elektrothermischer Stellantriebe Abfrage konventioneller Schalt- oder Tastkontakte, Fensterkontakte etc. in KNX-Anlagen zum Melden von Zuständen, Zählerständen, Bedienen von Verbrauchern etc. Abfrage externer Temperatursensoren zur Heizungsregelung Logikfunktionen zur Steuerung von Gebäudefunktionen Montage auf Hutschiene nach DIN EN 60715 in Unterverteiler Produkteigenschaften Aktorfunktionen: Schalten, Jalousie, elektrothermische Stellantriebe Aktorfunktion paarweise umschaltbar Integrierte Tasterschnittstelle mit 6 Eingängen 2 integrierte Raumtemperaturregler 2 Eingänge für Temperaturfühler (Art.-Nr. FF NTC) Ausgänge manuell bedienbar, Baustellenbetrieb Rückmeldung im Handbetrieb und im Busbetrieb Szenenfunktion Sperren einzelner Ausgänge per Hand oder Bus   Schaltfunktion Max. 6 Schaltausgänge Schließer- oder Öffnerbetrieb Logische Verknüpfung und Zwangsführung Rückmeldefunktion Zentrale Schaltfunktion mit Sammelrückmeldung Zeitfunktionen: Ein-, Ausschaltverzögerung, Treppenlichtschalter mit Abschaltwarnung   Jalousiefunktion Max. 3 Jalousieausgänge Eignung für AC-Motoren 230 V Behangposition direkt ansteuerbar Lamellenstellung direkt ansteuerbar Rückmeldung von Fahrzustand, Behangposition und Lamellenstellung Zwangsstellung durch übergeordnete Steuerung Sicherheitsfunktion: Regenalarm, Frostalarm, 3 unabhängige Windalarme Sonnenschutzfunktion   Funktion Stellantriebe Max. 2 Ausgänge für elektrothermische Stellantriebe Schaltbetrieb oder PWM-Betrieb Stellantriebe mit Charakteristik stromlos offen oder stromlos geschlossen ansteuerbar Notbetrieb bei Busausfall für Sommer und Winter Schutz gegen festsitzende Ventile Zwangsstellung Zyklische Überwachung der Eingangssignale parametrierbar   Heizungsregler 2 interne Regelkreise zur Regelung von zwei unabhängigen Räumen Regelung für Heiz- oder Kühlbetrieb, optional mit Zusatzstufe Zweipunkt-, PWM- oder PI-Regelung Vordefinierte Heizarten (Warmwasserheizung, Gebläsekonvektor ...) oder individuelle Parameter möglich   Eingänge 6 Eingänge für Taster Funktion der Eingänge: Schalten, Dimmen, Jalousiesteuerung, Szenennebenstelle, Helligkeits- oder Temperatur-Wertgeber 2 Eingänge für externe Temperaturfühler   Logikfunktionen Bis zu 10 Logikfunktionen mit jeweils 8 Eingängen, z.B. für UND-, ODER- und XOR-Verknüpfungen Umwandeln von Datenpunkttypen, z.B. 1 Bit auf 8 Bit Vergleichsoperationen, z.B. <, >, ≤, ≥ Arithmetische Funktionen, z.B. +, –, *, :

Ausschreibungstext

Multi station KNX multi station Intended use &#x25a0; Switching of electrical loads with floating contacts &#x25a0; Switching of electrically-driven blinds, shutters, awnings and similar hangings &#x25a0; Switching of electrothermal drives &#x25a0; Polling of conventional switching or push-button contacts, window contacts etc. in KNX systems, for reporting of states, meter levels, operation of loads, etc. &#x25a0; Polling of external temperature sensors for heating control &#x25a0; Logic functions to control building functions &#x25a0; Mounting on DIN rail according to EN 60715 in distribution boxes Product characteristics &#x25a0; Actuator functions: switching, blinds, electrothermal drives &#x25a0; Actuator function can be switched in pairs &#x25a0; Integrated push-button interface with 6 inputs &#x25a0; 2 integrated room temperature controllers &#x25a0; 2 inputs for temperature sensors (ref.-no. FF 7.8) &#x25a0; Outputs can be operated manually, construction site mode &#x25a0; Feedback in manual mode and in bus mode &#x25a0; Scene function &#x25a0; Disabling of individual outputs manually or via bus Switching function &#x25a0; Max. 6 switching outputs &#x25a0; Operation as NO or NC contacts &#x25a0; Logic operation and forcing function &#x25a0; Feedback function &#x25a0; Central switching function with collective feedback &#x25a0; Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function Blinds function &#x25a0; Max. 3 blinds outputs &#x25a0; Suitable for 230 V AC motors &#x25a0; Blind/shutter position directly controllable &#x25a0; Slat position directly controllable &#x25a0; Feedback of movement status, blind/shutter position and slat position &#x25a0; Forced position through higher-level controller &#x25a0; Safety function: rain alarm, frost alarm, 3 independent wind alarms &#x25a0; Sun protection function Function of valve drives &#x25a0; Max. 2 outputs for electrothermal drives &#x25a0; Switching operation or PWM operation &#x25a0; Actuators with characteristics &quot;normally open&quot; or &quot;normally closed&quot; can be controlled &#x25a0; Emergency operation in case of bus voltage failure for summer and winter &#x25a0; Protection against jamming valves &#x25a0; Forced position &#x25a0; Cyclical monitoring of the input signals can be parameterised Heating controller &#x25a0; 2 internal controllers to control two independent rooms &#x25a0; Control for heating or cooling, optionally with additional level &#x25a0; On-off, PWM or PI control &#x25a0; Predefined heating types (hot water heating, fan coil unit ...) or individual parameters possible Inputs &#x25a0; 6 inputs for push-buttons &#x25a0; Input functions: switching, dimming, blinds control, light scene extension unit, brightness or temperature value transmitter &#x25a0; 2 inputs for external temperature sensors Logic functions &#x25a0; Up to 10 logic operations with up to 8 inputs each, e.g. for AND, OR and XOR operations &#x25a0; Conversion of data point types, e.g. from 1-bit to 8-bit &#x25a0; Comparative operations, e.g. <, >, &le;, &ge; &#x25a0; Arithmetic functions, e.g. +, &ndash;, *, : Technical data KNX medium: TP 256 Rated voltage KNX: DC 21 ... 32 V SELV Current consumption KNX: max. 20 mA Current consumption KNX: min. 4 mA Connection, KNX: terminal Power loss: max. 6 W Ambient temperature: &minus;5 ... +45 &deg;C Storage/transport temperature: &minus;25 ... +70 &deg;C Relay outputs Contact type: floating relay contacts (&mu; contact) Switch type: NO contact Switching voltage: AC 250 V ~ Min. switching current AC: 100 mA Switching current AC1 (cos φ &gt; 0.8): 16 A Switching current AC3 (cos φ &lt; 0.8): 6 A Fluorescent lamps: 16 AX Switch-on current 200 &micro;s: max. 800 A Switch-on current 20 ms: max. 165 A Switching voltage DC: DC 12 ... 24 V Switching current DC 24 V: 6 A Connected load, 230 V Ohmic load: 3000 W Blind / Fan motors: 1380 VA Lamp loads 230 V Incandescent lamps: 3000 W HV halogen lamps: 2500 W HV LED lamps: max. 400 W Electronic transformers: 1500 W Inductive transformers: 1200 VA Fluorescent lamps T5/T8 non-compensated: 1000 W parallel compensated: 1160 W / 140 &micro;F lead-lag circuit: 2,300 W / 140 &micro;F Compact fluorescent lamps non-compensated: 1000 W parallel compensated: 1160 W / 140 &micro;F Mercury vapour lamps non-compensated: 1000 W parallel compensated: 1160 W / 140 &micro;F Electrothermal valve drives Cycle time: min. 15 min Connection, load Connection mode: screw terminals single wire: 1 x 0.5 ... 4 mm2 stranded without ferrule: 1 x 0.5 ... 4 mm2 stranded with ferrule: 1 x 0.5 ... 2.5 mm2 Inputs Rated voltage: DC 3.3 V SELV Signal duration: min. 100 ms NO contacts: max. 50 NC contacts: max. 50 Cable length: max. 30 m For cable lengths &gt; 3 m, use shielded cables. Connection, inputs: Connection mode: screw terminals single wire: 1 x 0.08 ... 1.5 mm2 stranded without ferrule: 1 x 0.08 ... 1 mm2 stranded with ferrule: 1 x 0.14 ... 0.5 mm2 Mounting width: 72 mm (4 rail units) Manufacturer: JUNG Ref.-no.: 23066 REGHE

Technische Daten

ETIM-Klasse: Bussystem-Mehrfach Bediengerät (EC001585)

Communication

Bussystem KNX
Ja
Bussystem KNX-Funk
Nein
Bus system KNX Secure
Nein
Bus system KNX Secure-RF (Radio Frequency)
Nein
Bussystem Funkbus
Nein
Bussystem LON
Nein
Bussystem Powernet
Nein
Andere Bussysteme
-

Options

Funk bidirektional
-
Status-LED
Ja
IR-Sensor
Nein
Präsenztaster
Nein
Zentrale Funktionseinheit für Sender/Aktoren
-

Mounting/installation

Montageart
REG

Measurements

Breite in Teilungseinheiten
4
Min. Tiefe der Gerätedose
- mm

Setting/control

Anzahl der Betätigungspunkte
-
Manuelle Sollwertverstellung
Nein

Model/type

Mit Display
Nein
Mit Temperaturregler
-
DCF77 Empfänger integriert
Nein
Mit Zeitschaltuhr
Nein
Mit Diebstahl-/Demontageschutz
Nein
Temperaturregler
true

Material

Werkstoff
Kunststoff
Werkstoffgüte
-
Oberfläche
-
Ausführung der Oberfläche
-

Colour

Farbe
-
RAL-Nummer (ähnlich)
-
Transparent
-

Protection

Schutzart (IP)
-

Connection

Busankopplung inklusive
Ja

Logistik

Nettogewicht
0,256 kg
Ursprungsland
Deutschland
Zolltarifnummer
85176200

Verpackung

VerpackungseinheitMengeGTINBruttogewichtAbmessungen (L × B × T)
Paket1—0,305 kg95 × 96 × 77 mm

Dokumente