Brightness sensor, DC 24 V (DC 15 ... 30 V)
- Herstellernummer
- EAN
Bestellung
- Bestelleinheit
- Stück
Beschreibung
Rated voltage 24 V DC range 0 ... 60 000 lux, linear The brightness sensor is used for the measuring and evaluation of the brightness. The dawn sensor is used for the measuring and evaluation of the brightness (dawn/dusk). The temperature sensor is used for the measuring and evaluation of the temperature. The value measured by the sensor is transmitted to an analogue output signal of 0 ... 10 V by the electronics. Connections: Plastic housing with PG7 thread + screw and pressure / moisture compensation (recommended cable 3 x 0.25 mm2) +UB: operating voltage 24 V DC GND: corresponding ground OUT: output 0 ... 10 V
Ausschreibungstext
Brightness sensor Brightness sensor The brightness sensor is used for the measuring and evaluation of the brightness. The dawn sensor is used for the measuring and evaluation of the brightness (dawn/dusk). The temperature sensor is used for the measuring and evaluation of the temperature. The value measured by the sensor is transmitted to an analogue output signal of 0 ... 10 V by the electronics. Connections: Plastic housing with PG7 thread + screw and pressure / moisture compensation (recommended cable 3 x 0.25 mm2) +UB: operating voltage 24 V DC GND: corresponding ground OUT: output 0 ... 10 V Technical data Supply voltage: DC 24 V (DC 15 ... 30 V) Connection: screw terminals Terminals for: 2.5 mm2 Connection cable: through screwed conduit entry PG 7 Recommended cable: 3 x 0,25 mm2 Cable length: max. 100 m Output: 0 ... 10 V DC (into a load of at least 1 kΩ, short-circuit protected) Ambient temperature: −30 ... +70 °C Protection level: IP 65 Mounting position: optional Dimensions: 58 x 35 x 64 mm Manufacturer: JUNG Ref.-no.: WS 10 H
Technische Daten
ETIM-Klasse: Bussystem-Helligkeitssensor (EC000927)
Communication
- Bussystem KNX
- Ja
- Bussystem KNX-Funk
- Nein
- Bussystem Funkbus
- Nein
- Bussystem LON
- Nein
- Bussystem Powernet
- Nein
- Andere Bussysteme
- -
Options
- Funk bidirektional
- -
Mounting/installation
- Montageart
- Aufputz
Model/type
- Mit LED-Anzeige
- Nein
- Ausführung des Sensors
- Lichtsensor eingebaut
- Anzahl der Kanäle
- 1
Connection
- Busankopplung inklusive
- -
Setting/control
- Einstellung
- 0, 60000 lx
Protection
- Schutzart (IP)
- IP65
Logistik
- Ursprungsland
- Deutschland
- Zolltarifnummer
- 90158020
Verpackung
| Verpackungseinheit | Menge | GTIN | Bruttogewicht | Abmessungen (L × B × T) |
|---|---|---|---|---|
| Paket | 1 | — | 0,105 kg | 90 × 55 × 77 mm |