Photo 1 of 2
ABB 2TKA00002896
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
The AUS74 is a front-mounted mounting box with telescope bottom part for board walls of 1 – 3 gypsum boards ( thickness of the wall 9 – 39 mm ). The height of the box is 54 – 70 mm thanks to the moving bottom part. The installation hole diameter is 73 - 74 mm (box drill AT4). At the side of the bottom part are three inlets for the 16 mm flexi pipe. There is also one inlet for the 16/20 mm and one inlet for the 20 mm flexi pipe. There are two inlets with strain reliefs on the bottom of the box for installing 8 - 13 mm cables and two inlets for the low voltage cables. Box combinations can be made both horizontal and vertical directions without any extra parts. The box has four openings, one on each side, through which conductors can also be conveyed from one box to another. At the top of the box there are two fixing places for screws to install it to the log wall. At the bottom there are marking holes for making box combinations (c/c 71 mm) . The protection class is IP3X. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670: 2005 (850 °C)._x000D_
Technical data
ETIM class: Box/housing for built-in mounting in the wall/ceiling (EC002601)
Mounting/installation
- Mounting method
- Flush-mounted
- Mounting switching equipment
- Screwing
- Number of non-adjustable device fixing lugs
- NA
- Number of adjustable device fixing lugs
- NA
- Luminaire hook mounting
- No
Model/type
- Shape
- Round
- Construction type
- Other
- Model
- Single
- Equipped with
- None
- With screws
- Yes
- Number of included spouts
- 0
- Cover model
- NA
- Transparent cover
- No
- With screening
- No
- Number of poles of the clamp
- 0
- With partition panel
- NA
Options
- Provided with revolving ring
- No
- Couplable
- Yes
- Housing feed-through by break-out opening
- Yes
- Housing feed-through by seal membrane
- No
- Housing feed-through by nozzle
- No
- Housing feed-through by step membrane
- No
- Pipe locking
- Yes
- Pipe locking optional
- No
- Sealable
- No
- Air tight
- No
- Clamp position fixed
- No
Measurements
- Diameter
- 74 mm
- Diameter
- 2.91338 inch
- Length
- 73 mm
- Length
- 2.87401 inch
- Width
- 73.000 mm
- Width
- 2.87401 inch
- Depth
- 73, 73 mm
- Depth
- 2.87401, 2.87401 inch
- Inner depth
- 52 mm
- Inner depth
- 2.04724 inch
- Suitable for wall/board thickness
- NA, - mm
- Suitable for wall/board thickness
- NA, - inch
- For tube diameter
- 16 mm
- Suitable for cable diameter
- 8, 8 mm
- Suitable for cable diameter
- 0.31496, 0.31496 inch
Other
- For number of electric fittings
- 1
- Cover attachment
- NA
- Nozzle
- NA
Connection
- Inlet from the rear
- No
- Number of inlets
- 0
- Max. conductor cross section
- NA mm²
- Max. conductor cross section
- NA in²
Material
- Material
- Plastic
- Halogen free
- Yes
- Surface protection
- Untreated
Colour
- Colour
- White
Protection
- Degree of protection (IP)
- IP3X
- Degree of protection (NEMA)
- NA
- Circuit integrity
- NA
Application
- Special application
- None
Approval/certification
- Compliant with BS 4662
- NA
Logistics
- Net weight
- 0.039 kg
- Country of origin
- Finland
- Customs tariff number
- 39259080
Packaging
| Pack | Quantity | GTIN | Gross weight | Dimensions (L × W × D) |
|---|---|---|---|---|
| BE | 0 | — | — | — |