Skip to content
Eltracore

ELKO EP

TEV-1

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

Two-level thermostat with function “WINDOW” DESCRIPTION Thermostat with „dead zone“, independent adjustable range -20 to+20 °C ( -4 °F to +68 °F). Two-level thermostat with function “WINDOW” meaning that output is switched in case the measured temperature is within set range ( adjustable in range -20.. +20 °C/ -4 °F to +68 °F). Used as protection against freezing ( water-shoots, pavements, drives, pipes, etc.) heating is on when temperature falls under set upper level (e.g.+5 °C/ +41 °F) and off in case it falls under lower level (e.g.-10 °C /-50 °F, when heating is not able eff ectively operate). Function monitoring short-circuit and sensor disconnection (break). TECHNICAL PARAMETERS Supply voltage: 230V AC. Output changeover contact 16A/ SPDT (AC-1). Thermostat is placed in water-proof box with IP65, which allows installation outside, with in-built sensor TC-0.

Technical data

ETIM class: Temperature monitoring relay (EC001446)

Connection

Type of electric connection
Clip connection
Number of contacts as normally closed contact
0
Number of contacts as normally open contact
0
Number of contacts as change-over contact
1

Electrical

Rated control supply voltage AC 50 Hz
230, 230
Rated control supply voltage AC 60 Hz
230, 230
Rated control supply voltage DC
0, 0
Voltage type for actuating
AC
Resistance measuring range
UN, - Ohm

Model/type

With detachable clamps
No
Number of measuring circuits
1

Options

Error registration possible
No
External reset possible
No

Setting/control

Temperature measuring range
UN, - °C

Measurements

Width
135 mm
Height
110 mm
Depth
66 mm

Documents