Skip to content
Eltracore

ELKO EP

RFTI-10B

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

The temperature sensor measures the temperature by internal sensor, which it sends in regular intervals to the system unit. DESCRIPTION The temperature sensor can be used in one of two ways: a) For displaying the measured temperature (from a garage, balcony, cellar, garden) on the display of the system unit or in the application. b) For measuring temperature, which it sends to the system unit, which may control the heating circuit based on the set temperature program (electric underfloor heating, air conditioning, boiler, etc.) It measures temperature in a range of -20 - 50 °C and sends it to the system unit in regular 5-min. intervals. It sends a signal upon sudden temperature change within 1 min. TECHNICAL PARAMETERS Battery power 1x 3 V CR 2477. Temperature range: -20°C až +50°C. Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20. Communication frequency (868MHz, 866MHz, 916MHz, 922MHz) with 2-way protocol RFIO or RFIO2. RFIO2 is an innovative iNELS RF Control wireless communication protocol, which brings you greater stability and eliminates signal collision between individual components. BOX design with any placement. External sensor TC (0 - +70 °C) or TZ (-40 - +125 °C) for length of 0.11 m, 3 m, 6 m, 12 m.

Technical data

ETIM class: Heating actuator for bus system (EC001586)

Communication

Bus system KNX
No
Bus system KNX-RF (Radio Frequency)
No
Bus system radio frequency
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
None

Options

Radio frequency bidirectional
No
Bus module detachable
No
Correcting variable consistent
Yes
Correcting variable switching
No
Manual switch
No

Mounting/installation

Mounting method
Flush-mounted

Measurements

Width in number of modular spacings
0
Min. depth of built-in installation box
UN mm

Connection

With bus connection
No
Number of outputs
0
Number of binary inputs
1

Protection

Valve protection function
No
Degree of protection (IP)
IP30

Electrical

Max. switching current (resistive load)
0 A
Max. output current
0 A
Switching voltage
0, 0 V

Documents