Skip to content
Eltracore

ELKO EP

IM3-80B

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

To connect up to 2/4 devices with potential-free contact (PIR, button, etc.), 1 x thermo input TZ/TC, output for powering detectors 12 V DC/75 mA, mounting into an installation box Binary input units IM3-20B, IM3-40B and IM3-80B are used for connection of 2, 4 or 8 devices with potential-less contacts (switches, buttons, switches of other design, PIR sensors, fire and gas detectors, etc.) Part of the inputs can be used as a balanced for alarm detectors: IM3-20B – inputs IN1, IN2 IM3-40B – inputs IN1, IN2 IM3-80B – inputs IN1 – IN5 Contacts of external devices connected to the inputs of the unit can be NO or NC - Input parameters are configured in the software IDM. The units generate a supply voltage of 12V DC/75 mA for powering external intrusion detectors, so they can power PIR detectors, fire and gas detectors. Active use 12V DC output for powering detectors increases the nominal consumption of units from BUS (see technical data). The units can be used for counting pulses of energy meters with pulse output. The units are equipped with a temperature input for connecting an external two-wire temperature sensor TC/TZ (see accessories). IM3-20B, IM3-40B, IM3-80B in case type B are designed for mounting into a wiring box.

Technical data

ETIM class: Binary input for bus system (EC000688)

Communication

Bus system KNX
No
Bus system KNX-RF (Radio Frequency)
No
Bus system radio frequency
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
Other

Options

Radio frequency bidirectional
No
Bus module detachable
No

Mounting/installation

Mounting method
Flush-mounted

Measurements

Width in number of modular spacings
0
Min. depth of built-in installation box
UN mm

Connection

With bus connection
Yes
Number of inputs
8

Setting/control

LED controlling
No

Model/type

With LED indication
Yes

Electrical

Input voltage
0, 12 V
Type of voltage (input voltage)
UN

Operating conditions

External signal voltage necessary
No

Protection

Degree of protection (IP)
IP30

Documents