IM3-140M
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
Binary inputs unit to connect up to 14 devices with potential-free contact (PIR, button, etc.), 14x binary inputs, 3-MODULE Binary input unit IM3-140M is designed to connect up to 14 devices with potentialless contact (such as switches, buttons of other designs, fi re and glass detectors and others). Inputs IN1 - IN7 can be balanced. Contacts of external devices connected to the inputs of the drive can be NO or NC - Input parameters are configured in the software IDM. The unit generates a supply voltage of 12V DC/150 mA for powering external detectors, so it can power PIR detectors, fire and gas detectors. Active use 12V DC output for powering detectors increases the nominal consumption units from BUS (see technical data). The unit can be used for counting pulses of energy meters with pulse output. IM3-140M in 3 module is designed for switchboard mounting on DIN rail EN60715.
Technical data
ETIM class: Binary input for bus system (EC000688)
Communication
- Bus system KNX
- No
- Bus system KNX-RF (Radio Frequency)
- No
- Bus system radio frequency
- No
- Bus system LON
- No
- Bus system Powernet
- No
- Other bus systems
- Other
Options
- Radio frequency bidirectional
- No
- Bus module detachable
- No
Mounting/installation
- Mounting method
- DRA (DIN-rail adaptor)
Measurements
- Width in number of modular spacings
- 3
- Min. depth of built-in installation box
- UN mm
Connection
- With bus connection
- Yes
- Number of inputs
- 14
Setting/control
- LED controlling
- No
Model/type
- With LED indication
- Yes
Electrical
- Input voltage
- 0, 0 V
- Type of voltage (input voltage)
- UN
Operating conditions
- External signal voltage necessary
- No
Protection
- Degree of protection (IP)
- IP20