Skip to content
Eltracore

ELKO EP

DA3-22M

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

For dimming ESL, LED and RLC load DA3-22M is a universal dimming two-channel actuator used to control light intensity of dimmable energy saving lamps (ESL), LED bulbs and R, L, C with power suppl 230 V AC, but you can also use the actuator for switching appliances. DA3-22M integrates 2 binary inputs, which allow 230V AC voltage connection (normal wall switch contacts) These inputs are in taken in the software IDM as standard binary inputs. DA3-22M has two MOSFET controlled outputs 230V AC, maximum load is 2x 400 VA. Type of light source is set by a switch on the front panel. By setting the min. brightness potentiometer on the front panel, flashing is eliminated of different types of light sources. Buttons on the front panel, you can manually switch on or off the corresponding output. Electronic overcurrent and thermal protection - switch off output in case of overload short circuit and overheating. During installation, it is necessary to leave on each side of the actuator at least half the module space for better cooling. DA3-22M in 3-MODULE version is designed for mounting into a switchboard on DIN rail EN60715.

Technical data

ETIM class: Dimming actuator for bus system (EC001094)

Communication

Bus system KNX
No
Bus system KNX-RF (Radio Frequency)
No
Bus system radio frequency
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
Other

Options

Radio frequency bidirectional
No
Bus module detachable
No
Power boost suitable
No
Parallel-service possible
Yes

Model/type

Model
Dimming actuator
With LED indication
Yes
Type of load
Universal

Mounting/installation

Mounting method
DRA (DIN-rail adaptor)

Measurements

Width in number of modular spacings
3
Min. depth of built-in installation box
UN mm

Connection

With bus connection
Yes
Substation input
No
Number of outputs
2

Setting/control

Local operation/hand operation
Yes

Performance

Output power
0, 400 W

Electrical

Max. control current
0 mA
Voltage
230, 230 V

Other

Frequency
50, 50 Hz

Protection

Degree of protection (IP)
IP20

Documents