ADC3-60M
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
ADC3-60M is an analog-to-digital converter and is equipped with 6 analog inputs. Analog inputs are used to connect analog sensors that generate a voltage or current signal. The analog inputs have a resolution of a 14-bit AD converter. The analog inputs have a common terminal COM. Analog inputs / outputs are configurable in IDM independently as voltage (U), current (I) or temperature. ADC3-60M is designed to capture an analog voltage signals from a weather station. The red LED on the front panel indicate overload of the analog input or sensor break. The temperature inputs at the top of the terminal are used to connect the following temperature sensors: TC / TZ - 2-wire connections Ni 1000, Pt1000, Pt100 - 2-wire and 3-wire connections. ADC3-60M in 3-MODULE version i s designed for mounting into a switchboard, on a DIN rail EN60715.
Technical data
ETIM class: Analogue input for bus system (EC000794)
Communication
- Bus system KNX
- No
- Bus system KNX-RF (Radio Frequency)
- No
- Bus system radio frequency
- No
- Bus system LON
- No
- Bus system Powernet
- No
- Other bus systems
- Other
Mounting/installation
- Mounting method
- DRA (DIN-rail adaptor)
Measurements
- Width in number of modular spacings
- 3
- Min. depth of built-in installation box
- UN mm
Model/type
- Model
- Base module
- With LED indication
- Yes
Connection
- Number of inputs
- 0
- With bus connection
- Yes
Setting/control
- Input voltage drive
- Yes
- Input current drive
- Yes
Protection
- Degree of protection (IP)
- IP20