Skip to content
Eltracore

ELKO EP

HRF-10

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

Frequency monitoring relay (FROU1-28) DESCRIPTION This unit monitors the frequency of a single phase supply and operates a relay if the frequency goes above or below set levels. LEDs indicate power on and trip status. Two changeover, volt-free relays are fitted. Front panel controls allow selection of: Nominal, under- and over-frequencies. Hysteresis (differential) and time delay before a trip triggers a relay response. TECHNICAL PARAMETERS Trip time delay: Adjustable 0,5 to 10s. Relay contacts: 2 x changeover, volt-free. Dimensions: 90 x 52 x 64 mm. Protection: IP40 (front panel), IP20 (terminals).

Technical data

ETIM class: Frequency monitoring relay (EC001442)

Connection

Type of electric connection
Clip connection
Number of contacts as normally closed contact
2
Number of contacts as normally open contact
2
Number of contacts as change-over contact
2

Electrical

Rated control supply voltage AC 50 Hz
161, 346
Rated control supply voltage AC 60 Hz
161, 346
Rated control supply voltage DC
0, 0
Voltage type for actuating
AC
Rated voltage
161, 346

Model/type

With detachable clamps
No

Other

Response value for frequency
0.5, 5 Hz

Setting/control

Min. adjustable delay-on energization time
0.5 s
Min. adjustable off-delay time
0.5 s

Operating conditions

Max. permitted delay-on energization time
10 s
Max. permitted off-delay time
10 s

Measurements

Width
52 mm
Height
90 mm
Depth
64 mm

Documents