DCDA-33M
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
For dimming LED and RGB sources 12-24 V DC by alternating current DCDA-33M/RGB dimming actuator is designed for dimming RGB and LED light sources with power supply 12-24 V DC, which are controlled by variable current. The actuator has three independent channels and each output channel is individually addressable and controllable. If desired, the channels can be associated as a single actuator for actuating the RGB source. DCDA-33M/RGB actuator can be controlled from the bus DALI, DMX or BUS. DCDA-33M/RGB can directly control from the system iNELS where the communication interface is the installation BUS. If ithe communication interface DALI or DMX is used, the DALI master EMDC-64M can be used. Setting the communication interface and addresses of actuators is performed using DIP switches: a) switch No. 1 In the upper position determines DALI or BUS In the lower position determines DMX b ) switch No. 2 (if that switch 1 is in the upper position) In the upper position determines DALI In the lower position determines BUS Using the control buttons on the front panel, you can manually control the output. The input circuits of communication interfaces are optically isolated from the supply voltage connected lamp unit, and is therefore resistant to electromagnetic interference. DCDA-33M/RGB in 3-module is designed for panel mounting on DIN rail EN60715.
Technical data
ETIM class: Dimmer (EC000025)
Model/type
- Assembly arrangement
- Basic element
- Number of modules (module system)
- UN
- Type of load
- Other
Setting/control
- Method of operation
- Other
- App control via Bluetooth
- UN
Options
- Dimming phase cut-on (leading edge)
- UN
- Dimming phase cut-off (trailing edge)
- UN
- Serial dimmer
- Yes
- Light value memory
- Yes
- Applicable with button
- No
- Applicable with movement sensor
- No
- Applicable with presence indicator
- No
- Applicable with time switch/timer
- No
- Applicable with transmission button
- No
- Applicable with infrared button
- No
Connection
- Substation input
- Yes
- Connection type
- UN
- Core cross section
- UN, - mm²
Mounting/installation
- Mounting method
- Other
- Type of fastening
- Click in mounting
Material
- Material
- Plastic
- Material quality
- Other
- Halogen free
- Yes
- Surface protection
- Other
- Surface finishing
- Matt
Colour
- Colour
- Grey
- RAL-number (similar)
- 7035
- Transparent
- Yes
Protection
- Suitable for degree of protection (IP)
- IP20
Other
- Impact strength
- UN
- Frequency
- 0, 0 Hz
Performance
- Nominal power
- 0, 0
Electrical
- Nominal voltage
- 12, 60 V
- Control voltage
- 12, 60 V
Measurements
- Device width
- 52 mm
- Device height
- 90 mm
- Device depth
- 65 mm
- Min. depth of built-in installation box
- UN mm