Skip to content
Eltracore

ELKO EP

RFDEL-71M

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

The universal modular dimmer is used to regulate all light sources (R, L, C, ESL, LED). DESCRIPTION 6 light functions - smooth increase or decrease with time setting 2s-30 min. When switched off , the set level is stored in the memory, and when switched back on, it returns to the most recently set value. Thanks to setting the min. brightness by potentiometer, you will eliminate flashing of the LED and ESL light sources. The universal dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller). It is possible to combine with Controllers or System units of iNELS RF Control. Connecting an existing button to the control input allows you to combine wireless control with the classic (wire). In the case of placement in the metal switchboard, we recommend you to use an external antenna AN-E to improve signal transmission. TECHNICAL PARAMETERS Power supply AC 230 V or AC 120 V. Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20. Output contact: 2x contactless input (MOSFET 600 W při Cos?=1). Communication frequency (868MHz, 866MHz, 916MHz, 922MHz) with bidirectional protocol RFIO or RFIO2. RFIO2 is an innovative iNELS RF Control wireless communication protocol, which brings you greater stability and eliminates signal collision between individual components. 3-module design with switchboard mounting.

Technical data

ETIM class: Dimming actuator for bus system (EC001094)

Communication

Bus system KNX
No
Bus system KNX-RF (Radio Frequency)
No
Bus system radio frequency
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
None

Options

Radio frequency bidirectional
Yes
Bus module detachable
No
Power boost suitable
No
Parallel-service possible
Yes

Model/type

Model
Control module
With LED indication
Yes
Type of load
Universal

Mounting/installation

Mounting method
Other

Measurements

Width in number of modular spacings
3
Min. depth of built-in installation box
UN mm

Connection

With bus connection
No
Substation input
Yes
Number of outputs
1

Setting/control

Local operation/hand operation
Yes

Performance

Output power
600, 600 W

Electrical

Max. control current
0 mA
Voltage
230, 230 V

Other

Frequency
50, 50 Hz

Protection

Degree of protection (IP)
IP20

Documents