Skip to content
Eltracore

ELKO EP

RFDAC-71B

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

Analog controller with output 0(1) - 10V serves for dimming fluorescent lamps DESCRIPTION Using for: a) dimming fluorescent lamps (using a dimmable ballast it is possible to connect up to 10pcs). b) dimming LED panels (using a a suitable source - up to 50pcs of LP-6060-3K/6K). c) thermo-valve (TELVA) control. d) other regulators control (e.g. power dimmers DIM-6). 6 lighting functions – continuous start or return with time setting range of 2s-30min. When it turns off the set level is stored in memory and after switching ON it returns to the last set value. Analog controller can be controlled by up to 32 channels (1 channel represents one button on the controller). It is possible to combine with Controllers or System units of iNELS RF Control. TECHNICAL PARAMETERS Power supply AC 110 - 230. Range up to 200 m (free open space), in the case of insufficient signal between controller and unit, please use the signal repeater - RFRP-20. Output contact: 1x potential-free analog output 16A. (AgSnO2, 4000 VA/AC1). Communication frequency (868MHz, 866MHz, 916MHz, 922MHz) with bidirectional protocol RFIO or RFIO2. RFIO2 is an innovative iNELS RF Control wireless communication protocol, which brings you greater stability and eliminates signal collision between individual components. BOX design intended to be mounted into an installation box, into the ceilings or into the light covers.

Technical data

ETIM class: Analogue actuator for bus system (EC001096)

Communication

Bus system KNX
No
Bus system KNX-RF (Radio Frequency)
No
Bus system radio frequency
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
None

Mounting/installation

Mounting method
Flush-mounted

Measurements

Width in number of modular spacings
0
Min. depth of built-in installation box
UN mm

Model/type

Model
Base module
With LED indication
Yes

Connection

With bus connection
No
Number of outputs
2

Electrical

Output current
0, 10 mA
Output voltage
1, 10 V

Protection

Degree of protection (IP)
IP30

Documents