RFDEL-71B
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
The universal modular dimmer is used to regulate all light sources (R, L, C, ESL, LED). DESCRIPTION 6 lighting functions – continuous start or return with time setting range of 2s-30min. When it turns off the set level is stored in memory and after switching ON it returns to the last set value. Setting min. brightness by potentiometer on the front of the device eliminates fl ashing of various types of light sources. Advanced mode control allows you to combine with: a) Control and system units of iNELS RF Control. b) Control signal 0(1)-10 V. c) Connection to iNELS BUS using DAC converter. d) The existing button in the installation. Universal dimmer can be controlled by up to 32 channels (1 channel represents one button on the controller). By installing the actuator under an existing button, you have the option of further control of lighting using RF Control wireless transmitters or the RF Touch touch screen unit. TECHNICAL PARAMETERS Power supply AC 230 V or AC 120 V. Range up to 160 m (free open space), in the case of insufficient signal between controller and unit, please use the signal repeater - RFRP-20. Output contact: 2x contacless output (MOSFET 160 W při Cos?=1). Communication freqeuncy (868MHz, 866MHz, 916MHz, 922MHz) with bidirectional protocol RFIO or RFIO2. RFIO2 is an innovative iNELS RF Control wireless communication protocol, which brings you greater stability and eliminates signal collision between individual components. 3-module design intended to be mounted in the switchboard.
Technical data
ETIM class: Dimming actuator for bus system (EC001094)
Communication
- Bus system KNX
- No
- Bus system KNX-RF (Radio Frequency)
- No
- Bus system radio frequency
- No
- Bus system LON
- No
- Bus system Powernet
- No
- Other bus systems
- None
Options
- Radio frequency bidirectional
- Yes
- Bus module detachable
- No
- Power boost suitable
- No
- Parallel-service possible
- Yes
Model/type
- Model
- Control module
- With LED indication
- Yes
- Type of load
- Universal
Mounting/installation
- Mounting method
- Flush-mounted
Measurements
- Width in number of modular spacings
- 0
- Min. depth of built-in installation box
- UN mm
Connection
- With bus connection
- No
- Substation input
- Yes
- Number of outputs
- 1
Setting/control
- Local operation/hand operation
- Yes
Performance
- Output power
- 160, 160 W
Electrical
- Max. control current
- 0 mA
- Voltage
- 230, 230 V
Other
- Frequency
- 50, 50 Hz
Protection
- Degree of protection (IP)
- IP30