HRH-MS-VS-4A
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
Level switch HRH-5 + motor starter MS18 + installation contactor DESCRIPTION The sets are in three variants HRH-MS-VS-2.5A – level switch HRH-5 with installation contactor VS425-40 (25A contakt) and motor starter MS18 1.6-2.5 A. HRH-MS-VS-4A – level switch HRH-5 with installation contactor VS425-40 (25A contakt) and motor starter MS18 2,5-4 A. HRH-MS-VS-6.3A – level switch HRH-5 with installation contactor VS425-40 (25A contakt) and motor starter MS18 4-6,3 A. Possibility of connection to 3-phase pump. Easy to install without complicated wiring - ready for installation. Possibility of setting PUMP UP and PUMP DOWN and also delayd switching (e.g. in case of level fluctuations). Adjustable delay (0,5-10s). TECHNICAL PARAMETERS Supply voltage AC/DC 230 V/400 V. Adjustable sensitivity: 5-100 k?. Placed in switchboard with IP65 cover.
Technical data
ETIM class: (Fill) level monitoring relay (EC001447)
Connection
- Type of electric connection
- Clip connection
- Number of inputs for electrodes
- 3
- Number of contacts as normally closed contact
- 0
- Number of contacts as normally open contact
- 0
- Number of contacts as change-over contact
- 1
Electrical
- Rated control supply voltage AC 50 Hz
- 230, 230
- Rated control supply voltage AC 60 Hz
- 230, 230
- Rated control supply voltage DC
- 0, 0
- Voltage type for actuating
- AC
Model/type
- With detachable clamps
- No
Setting/control
- Min. adjustable operate delay time
- 0.5 s
- Min. adjustable off-delay time
- 0.5 s
- Response value sensitivity adjustable
- Yes
Operating conditions
- Max. permitted operate delay time
- 10 s
- Max. permitted off-delay time
- 10 s
Other
- Physical measurement principle
- Conductive
Options
- Cascadable
- UN
Measurements
- Width
- 202 mm
- Height
- 201 mm
- Depth
- 120 mm