Skip to content
Eltracore

ELKO EP

DMD3-1

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

DMD3-1 is a combined detector for ceiling mounting. Possibilities to use the DMD3-1: - Motion detector - Sensor luminescence - Temperature measuring - Humidity measurement The unit is equipped with two communication interfaces: - installation iNELS BUS - DALI (a maximum 4 pcs of DMD3-1 or DLS3-1 units can be used on one DALI bus). The motion detector is used to detect people moving in the area. Using the passive scanning infrared spectrum for detection. Integrated luminescence sensor can be used for sensing current luminescence at the point of installation of the unit. This information can be used in tasks to maintain a constant luminescence. In space where it is possible, thanks to the contribution of natural light from the outside to adjust the artifi cial light, which can reduce energy consumption. Setting the communication interface is done using the SET button. The unit can be configured via the iNELS3 Designer & Manager software, which, among other things it is possible to: - Set the desired function depending on detected motion. - Resolve jobs based on the value of luminescence. - Enable/disable the alarm LED on the detector housing. DMD3-1 detector is designed for indoor installation and is not intended for outdoor use. DMD3-1 detector is powered directly via the iNELS BUS installation (nominal 27?V?DC) or DALI BUS (nominal 16 V DC).

Technical data

ETIM class: Movement sensor for bus system (EC001582)

Communication

Bus system KNX
No
Bus system KNX-RF (Radio Frequency)
No
Bus system radio frequency
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
Other

Options

Radio frequency bidirectional
No
Creep-under protection
Yes
Operation mode switch
Yes
Animal zone
No
Teach-function for response value luminosity
Yes
Switch-off delay self-learning
Yes

Model/type

Model
Movement sensor
Number of channels
1

Mounting/installation

Mounting method
Surface mounted

Material

Material
Plastic
Material quality
Other
Surface protection
Other
Surface finishing
Matt

Colour

Colour
White
RAL-number (similar)
9003
Transparent
No

Connection

With bus connection
Yes
Substation input
No

Setting/control

Staircase light controller
Yes
Response value luminosity adjustable
Yes
Number of binary inputs
0

Measurements

Optimum mounting height
3 m
Diameter reach on floor
7 m
Min. depth of built-in installation box
UN mm

Performance

Max. reach sideways
7 m
Max. reach frontally
7 m
Detection angle vertical
0, 55 °
Detection angle horizontal
0, 55 °

Electrical

Switching power
0 W

Other

Min. switch-on time
1 s
Max. duty cycle
1440 min

Documents