DA3-06M
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
DA3-06M is a universal dimmer six-channel actuator to control the brightness of dimmable ESL, LED and RLC light sources with 230V supply. Maximum possible load is 150 VA for each channel. Each output channel is individually controllable and addressable. The type of light source is set by the switch on the front of the instrument. Setting the min. Brightness potentiometer on the front of the device eliminates the flicker of various types of light sources. You can manually control the output by using the front panel control buttons. The actuator is equipped with an electronic overcurrent and thermal protection that shuts off the output during overload, short circuit, overheating. During installation, leave at least half of the free space on each side of the actuator for better cooling. TECHNICAL PARAMETERS 6x contactless outputs, 2x MOSFET. Supply voltage 3x AC 230 V. DA3-06M in 6-MODUL version is designed for DIN rail mounting EN60715. Dimensions: 90 x 105 x 65 mm.
Technical data
ETIM class: Dimming actuator for bus system (EC001094)
Communication
- Bus system KNX
- No
- Bus system KNX-RF (Radio Frequency)
- No
- Bus system radio frequency
- No
- Bus system LON
- No
- Bus system Powernet
- No
- Other bus systems
- Other
Options
- Radio frequency bidirectional
- No
- Bus module detachable
- No
- Power boost suitable
- No
- Parallel-service possible
- Yes
Model/type
- Model
- Dimming actuator
- With LED indication
- Yes
- Type of load
- Universal
Mounting/installation
- Mounting method
- DRA (DIN-rail adaptor)
Measurements
- Width in number of modular spacings
- 6
- Min. depth of built-in installation box
- UN mm
Connection
- With bus connection
- Yes
- Substation input
- No
- Number of outputs
- 6
Setting/control
- Local operation/hand operation
- Yes
Performance
- Output power
- 0, 120 W
Electrical
- Max. control current
- 0 mA
- Voltage
- 230, 230 V
Other
- Frequency
- 50, 50 Hz
Protection
- Degree of protection (IP)
- IP20