JA3-018M
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
JA3-018M is an actuator designed for control of roller shutters, blinds, awnings, garage doors, entrance gates, etc. It controls electric drives that are controlled in two directions and have a built-in limit switch. The unit's status is indicated by the green RUN LED on the front panel - If the power supply is connected, but there is no communication via BUS with master, the LED RUN is on continuously. - If the supply voltage is connected and the unit communicates by BUS, the LED RUN flashes. The status of the output contacts is indicated by the U/D LED: - When the blind/roller blind is moving up/down, the corresponding LED lights up. - If the number of switching operations per minute is exceeded, the corresponding LED flashes. JA3-018M in 6-MODULE version is designed for mounting into a switchboard on DIN rail EN60715.
Technical data
ETIM class: Switch actuator for bus system (EC001097)
Communication
- Bus system KNX
- No
- Bus system KNX-RF (Radio Frequency)
- No
- Bus system radio frequency
- No
- Bus system LON
- No
- Bus system Powernet
- No
- Other bus systems
- Other
Options
- Radio frequency bidirectional
- No
- Bus module detachable
- No
- Modular expandability
- No
Mounting/installation
- Mounting method
- DRA (DIN-rail adaptor)
- Number of binary inputs
- 0
Measurements
- Width in number of modular spacings
- 6
- Min. depth of built-in installation box
- UN mm
Setting/control
- Local operation/hand operation
- Yes
Model/type
- With LED indication
- Yes
Electrical
- Max. switching power
- 1000 W
- Max. switching current
- 10 A
- Rated current
- UN A
- Rated operating voltage
- 20, 30 V
Performance
- Output power
- UN W
Application
- Suitable for C-load
- UN
Other
- Max. number of switching contacts
- 9
Connection
- Different phases connectable
- Yes
- With bus connection
- Yes
Protection
- Degree of protection (IP)
- IP20