HRN-54
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
Serves to monitor voltage , phase failure and sequence in switchboards, protection of devices DESCRIPTION Serves to monitor voltage , phase failure and sequence in switchboards. Supply is done from monitored voltage. Fixed T1(500ms) and adjustable T2 (0.1 – 10 s) delay to eliminate short voltage drops and peak. In case supply voltage falls below 60 %Un (Uoff lower level)relay immediately breaks with no delay It is possible to set upper and lower level of monitoring voltage. Monitoring voltage relay in 2 variants: HRN-54: supply from all phases which means that relay is functional also in case when one phase is faulty HRN-54N: supply L1-N, means that relay monitors also failure of neutral wire Faulty state is indicated by red LED and by breaking output relay contact. TECHNICAL PARAMETERS Monitored power voltage: HRN-54: 3 x 400 V HRN-54N: 3 x 400 V/ 230 V Umax: 105 – 125% of monitored voltage. Umi): 75 – 95% of monitored voltage. Output contact: 1x changeover 8 A/250 V AC1 (AgNi, 2500 VA). 1-MODULE, DIN rail mounting.
Technical data
ETIM class: Voltage monitoring relay (EC001438)
Connection
- Type of electric connection
- Clip connection
- Number of contacts as normally closed contact
- 1
- Number of contacts as normally open contact
- 1
- Number of contacts as change-over contact
- 1
Model/type
- With detachable clamps
- No
Electrical
- Voltage measuring range 1
- 0, 0 V
- Voltage measuring range 2
- 0, 0 V
- Type of voltage measuring range
- AC
- Response value voltage
- 0, 0 V
- Single-phase under voltage possible
- Yes
- Three-phase under voltage possible
- Yes
- Single-phase overvoltage possible
- Yes
- Rated control supply voltage AC 50 Hz
- 400, 400
- Three-phase overvoltage possible
- Yes
- Rated control supply voltage AC 60 Hz
- 400, 400
- Rated control supply voltage DC
- 0, 0
- Voltage type for actuating
- AC
Options
- Single-phase hysteresis possible
- Yes
- Three-phase hysteresis possible
- Yes
- Contains function DC-under voltage
- No
- Contains function DC overvoltage
- No
- Contains function DC-voltage hysteresis
- No
Setting/control
- Min. adjustable delay-on energization time
- 0.1 s
- Min. adjustable off-delay time
- 0.1 s
Operating conditions
- Max. permitted delay-on energization time
- 10 s
- Max. permitted off-delay time
- 10 s
Measurements
- Width
- 17.6 mm
- Height
- 90 mm
- Depth
- 64 mm