RFSF-100
- Manufacturer part no.
- EAN
Price on requestAsk us for a quote for this product.
Ordering
- Order unit
- piece
Description
The flood detector is used to detect water leakage - the activation occurs the moment the flooding of the contacts located on the underside of the detector occurs. Upon detecting water, the flood detector immediately sends a signal to the switched unit, which further switches on a pump, GSM gate or closes a pipe valve. Flood detection is signalled by optical and acoustic signalling. Range up to 160 m (in open space); if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Technical data
ETIM class: (Fill) level monitoring relay (EC001447)
Connection
- Type of electric connection
- Other
- Number of inputs for electrodes
- 1
- Number of contacts as normally closed contact
- 0
- Number of contacts as normally open contact
- 0
- Number of contacts as change-over contact
- 0
Electrical
- Rated control supply voltage AC 50 Hz
- 0, 0
- Rated control supply voltage AC 60 Hz
- 0, 0
- Rated control supply voltage DC
- 3, 3
- Voltage type for actuating
- DC
Model/type
- With detachable clamps
- No
Setting/control
- Min. adjustable operate delay time
- 0 s
- Min. adjustable off-delay time
- 0 s
- Response value sensitivity adjustable
- No
Operating conditions
- Max. permitted operate delay time
- 0 s
- Max. permitted off-delay time
- 0 s
Other
- Physical measurement principle
- Other
Options
- Cascadable
- UN
Measurements
- Width
- 89 mm
- Height
- 23 mm
- Depth
- 89 mm