HRH-9
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
-The relay is designed to control the level of conductive liquids in wells, sumps, tanks, pools, tankers, reservoirs ... -Galvanically separated power and monitoring circuits. -Possibility to connect up to 6 level probes (+ one common probe). -Each probe has its own output relay function selection for each probe separately. -Adjustable delay after power on (START Delay). -Adjustable relay closing delay (Probe Delay) - common for all probes. -Automatic calibration of the sensitivity of the probes according to the conductivity of the monitored liquid. -For probes 4, 5, 6 possibility of manual sensitivity adjustment. -A monitoring frequency of 10 Hz prevents polarization of the liquid and increases the resistance to mains frequency interference.
Technical data
ETIM class: (Fill) level monitoring relay (EC001447)
Connection
- Type of electric connection
- Clip connection
- Number of inputs for electrodes
- 7
- Number of contacts as normally closed contact
- 0
- Number of contacts as normally open contact
- 6
- Number of contacts as change-over contact
- 0
Electrical
- Rated control supply voltage AC 50 Hz
- 24, 240
- Rated control supply voltage AC 60 Hz
- 24, 240
- Rated control supply voltage DC
- 24, 240
- Voltage type for actuating
- AC/DC
Model/type
- With detachable clamps
- No
Setting/control
- Min. adjustable operate delay time
- UN s
- Min. adjustable off-delay time
- UN s
- Response value sensitivity adjustable
- Yes
Operating conditions
- Max. permitted operate delay time
- UN s
- Max. permitted off-delay time
- UN s
Other
- Physical measurement principle
- Conductive
Options
- Cascadable
- UN
Measurements
- Width
- 105 mm
- Height
- 90 mm
- Depth
- 65 mm