Skip to content
Eltracore

Jung

Power unit for rail mounting

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

Intended use Manual or automatic switching of light in stairways Installation in distribution boxes on DIN rail according to EN 60715 Switch-on via pulse insert or push-button   Product characteristics Run-on time adjustable Electronic overload protection for the control input Four different operating modes can be set: Automatic function without switch-off warning Automatic function with switch-off warning Light switched ON continuously Light switched OFF continuously   Automatic switching of light The pulse insert is combined with a motion detector cover. As soon as the brightness drops below a value set on the motion detector cover and motions are detected, the pulse insert sends a switch-on signal cyclically to the automatic RMD. The latter switches on the light for the set run-on time. After the run-on time has elapsed, the automatic RMD switches the light off. After switch-off, pulse inserts with motion detector covers will not detect any motions for approx. 3 seconds.

Tender text

Power unit for rail mounting Power unit for rail mounting Intended use ■ Manual or automatic switching of light in stairways ■ Installation in distribution boxes on DIN rail according to EN 60715 ■ Switch-on via pulse insert or push-button Product characteristics ■ Run-on time adjustable ■ Electronic overload protection for the control input Four different operating modes can be set: ■ Automatic function without switch-off warning ■ Automatic function with switch-off warning ■ Light switched ON continuously ■ Light switched OFF continuously Automatic switching of light The pulse insert is combined with a motion detector cover. As soon as the brightness drops below a value set on the motion detector cover and motions are detected, the pulse insert sends a switch-on signal cyclically to the automatic RMD. The latter switches on the light for the set run-on time. After the run-on time has elapsed, the automatic RMD switches the light off. After switch-off, pulse inserts with motion detector covers will not detect any motions for approx. 3 seconds. Technical data Rated voltage: AC 230 V ~ Mains frequency: 50 Hz Power consumption: approx. 1 W Ambient temperature: +5 ... +45 °C Shut-off delay: approx. 10 s ... 15 min Shut-off delay tolerance: ± 20 % Permissible current for control input A1: max. 40 mA Switching voltage: AC 250 V ~ Switching current Ohmic: 16 A Switch-on current 20 ms: max. 165 A Min. switching current AC: 100 mA Connected load Incandescent lamps: 2,300 W HV halogen lamps: 2,300 W HV LED lamps: 400 W Fluorescent lamps parallel compensated: 920 W Fluorescent lamps non-compensated: 1200 VA Fluorescent lamps lead-lag circuit: 2,300 W / 140 µF Electronic transformers: 1500 W Inductive transformers: 1000 VA Electronic ballast: depending on type Mounting width: 18 mm (1 rail unit) Total length power cable: max. 100 m Total length of control cable: max. 100 m Connection: screw terminals single wire: 1 x 0.75 ... 4.0 mm2 2 x 0.75 ... 2.5 mm2 stranded without ferrule: 1 x 0.75 ... 4.0 mm2 2 x 0.75 ... 2.5 mm2 stranded with ferrule: 1 x 0.5 ... 2.5 mm2 Approvals: VDE Manufacturer: JUNG Ref.-no.: 1208 REG

Technical data

ETIM class: Staircase lighting timer (EC000297)

Model/type

Function
Electronic

Mounting/installation

Mounting method
DIN rail

Measurements

Width in number of modular spacings
1
Built-in depth
- mm

Connection

Number of contacts as normally open contact
1
Number of contacts as normally closed contact
-
Number of contacts as change-over contact
-

Electrical

Control voltage 1
- V
Type of control voltage 1
-
Frequency control voltage 1
- Hz
Control voltage 2
- V
Type of control voltage 2
-
Frequency control voltage 2
- Hz
Rated switch current
16 A
Max. switching current (cos phi = 0.6)
165 A
Push button glow-lamp current
- mA
Supply voltage
230, 230 V
Voltage type (supply voltage)
AC
Max. incandescent lamp load
2300 W
Max. load fluorescent lamp
1200 VA
Max. load fluorescent lamp (Duo circuit)
2300 VA
Max. load fluorescent lamp (parallel compensated)
920 VA
Max. switching power LED
- W
Power consumption
0.5 W

Other

Release-delay
- min
Wiring system
3 and 4 wire configuration
Pre-warning of switching-off
-
Repetitive
Repetitive + continuous light + time extension

Options

Current surge function selectable
-

Logistics

Net weight
0.07 kg
Country of origin
Germany
Customs tariff number
85365080

Packaging

PackQuantityGTINGross weightDimensions (L × W × D)
packet1—0.096 kg95 × 65 × 20 mm

Documents