Skip to content
Eltracore

Jung

Electronic switch insert 1-channel, with satellite input, Flush mounted (plaster)

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

with satellite input for covers ref.-no.: .. 1700 .., .. 1701 .., .. 1750 D .., .. 1751 BT .., .. 17180 .., .. 17280 .., .. 17181 .., .. 17281 .., DWPM 17360 .. for displays ref.-no.: .. 1790 D .. Intended use Operation with suitable cover of the LB Management Installation in flush box according to DIN 49073 Operation with neutral conductor: Switching of incandescent lamps, HV halogen lamps, electronic or inductive transformers with halogen or LED lamps, switchable or dimmable HV-LED or compact fluorescent lamps Operation without neutral conductor: Switching of incandescent lamps, HV halogen lamps, electronic or inductive transformers with halogen or LED lamps, dimmable HV-LED or compact fluorescent lamps   Product characteristics Switch-on via bulb-preserving soft start Connection of satellite units possible Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest Electronic over-temperature protection Test operation for functional test Device is powered via phase conductor and neutral conductor , therefore there is no leading edge phase control or trailing edge phase control Device is powered via the phase conductor and the connected load and therefore works in the leading edge phase control or trailing edge phase control principle Automatic or manual setting of the operating mode suitable for the load Display of the set operating mode by means of LED

Tender text

Electronic switch insert 1-channel Electronic switch insert 1-channel Intended use ■ Operation with suitable cover of the LB Management ■ Installation in flush box according to DIN 49073 Operation with neutral conductor: ■ Switching of incandescent lamps, HV halogen lamps, electronic or inductive transformers with halogen or LED lamps, switchable or dimmable HV-LED or compact fluorescent lamps Operation without neutral conductor: ■ Switching of incandescent lamps, HV halogen lamps, electronic or inductive transformers with halogen or LED lamps, dimmable HV-LED or compact fluorescent lamps Product characteristics ■ Switch-on via bulb-preserving soft start ■ Connection of satellite units possible ■ Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest ■ Electronic over-temperature protection ■ Test operation for functional test Operation with neutral conductor: ■ Device is powered via phase conductor and neutral conductor , therefore there is no leading edge phase control or trailing edge phase control Operation without neutral conductor: ■ Device is powered via the phase conductor and the connected load and therefore works in the leading edge phase control or trailing edge phase control principle ■ Automatic or manual setting of the operating mode suitable for the load ■ Display of the set operating mode by means of LED Technical data Rated voltage: AC 230 V ~ Mains frequency: 50/60 Hz Stand-by power: approx. 0.25 W Power loss: approx. 4 W Ambient temperature: −5 ... +45 °C Connected load at 25 °C Incandescent lamps: 20 ... 400 W HV halogen lamps: 20 ... 400 W Electronic transformers: 20 ... 400 W Electronic transformers with LV LED: 20 ... 100 W Inductive transformers: 20 ... 400 VA Inductive transformers with LV LED: 20 ... 100 VA HV LED lamps: typical 3 ... 100 W Compact fluorescent lamps: typical 3 ... 100 W When operating with neutral conductor or without neutral conductor in operating mode LED trailing edge phase control: Connection power for HV LED lamps typ. 3 ... 200 W, electronic transformers with LV LED typ. 20 ... 200 W. Ohmic-capacitive: 20 ... 400 W Capacitive-inductive: not permitted Ohmic-inductive: 20 ... 400 VA Ohmic and HV LED: typical 3 ... 100 W Ohmic and CFL: typical 3 ... 100 W Operation without neutral conductor in operating mode R,L,C,LED: Ohmic-inductive mixed load: maximum 50 % proportion of ohmic load. Otherwise incorrect calibration of the dimmer may result. Operation without neutral conductor: Minimum load 50 W. Does not apply to loads with HV LED and compact fluorescent lamps. When using LED lamps that are not dimmable the neutral conductor must be connected. Connection: screw terminals single wire: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2 stranded without ferrule: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2 stranded with ferrule: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 1.5 mm2 Number of satellite units Satellite insert 2-wire 1720 NE: unlimited Satellite insert 3-wire 1723 NE: 5 Push-buttons: unlimited Total length of extension unit cable: max. 100 m Total length power cable: max. 100 m Manufacturer: JUNG Ref.-no.: 1704 ESE

Technical data

ETIM class: Electronic switch (EC001588)

Model/type

Assembly arrangement
Basic element
Model
Tronic
Type of load
Other
Number of channels
1

Connection

Substation input
Yes

Options

Light value memory
-
Applicable with button
Yes
Applicable with movement sensor
Yes
Applicable with presence indicator
Yes
Applicable with time switch/timer
Yes
Applicable with transmission button
Yes
Applicable with infrared button
No
IFTTT support available
No

Mounting/installation

Mounting method
Flush-mounted
Type of fastening
Mounting with claw and screw

Material

Material
-
Material quality
-
Surface protection
-
Surface finishing
-

Colour

Colour
-
RAL-number (similar)
-
Transparent
-

Electrical

Nominal voltage
230 V
Rated current
16 A
Switch capacity
3.0, 400.0 W
Switch capacity HVAC
- W
Power loss
0.5 W

Other

Frequency
50.0, 60.0 Hz

Measurements

Min. depth of built-in installation box
- mm

Communication

Compatible with Apple HomeKit
No
Compatible with Google Assistant
No
Compatible with Amazon Alexa
No

Logistics

Net weight
0.078 kg
Country of origin
Germany
Customs tariff number
85365080

Packaging

PackQuantityGTINGross weightDimensions (L × W × D)
packet10—1.117 kg235 × 175 × 92 mm
carton100—8.641 kg460 × 360 × 245 mm
PF1,200—194.82 kg1,200 × 800 × 1,550 mm

Documents