Standard touch dimmer insert LED, without satellite input, Flush mounted (plaster)
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
Intended use Switching and dimming of lighting Operation with suitable cover of the LB Management Installation in flush box according to DIN 49073 Product characteristics Device works according to the leading edge phase control or trailing edge phase control principle Automatic or manual setting of the dimming principle suitable for the load Display of the set operating mode by means of LED Device can be operated without neutral conductor Switch-on via bulb-preserving soft start Switch-on with last brightness or saved switch-on brightness Switch-on brightness can be saved permanently Minimum brightness can be saved permanently Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest Electronic over-temperature protection Test operation for functional test Power extension possible by means of power boosters (ref.-no. ULZ 1755 REG) Optional accessory: compensation module LED, ref.-no.: KM LED 230 U
Tender text
Standard touch dimmer insert LED Standard touch dimmer insert LED Intended use ■ Switching and dimming of lighting ■ Operation with suitable cover of the LB Management ■ Installation in flush box according to DIN 49073 Product characteristics ■ Device works according to the leading edge phase control or trailing edge phase control principle ■ Automatic or manual setting of the dimming principle suitable for the load ■ Display of the set operating mode by means of LED ■ Device can be operated without neutral conductor ■ Switch-on via bulb-preserving soft start ■ Switch-on with last brightness or saved switch-on brightness ■ Switch-on brightness can be saved permanently ■ Minimum brightness can be saved permanently ■ Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest ■ Electronic over-temperature protection ■ Test operation for functional test ■ Power extension possible by means of power boosters (ref.-no. ULZ 1755 REG) ■ Optional accessory: compensation module LED, ref.-no.: KM LED 230 U Technical data Rated voltage: AC 230 V ~ Mains frequency: 50/60 Hz Power loss: approx. 2 W Ambient temperature: −5 ... +45 °C Connected load at 25 °C Incandescent lamps: 20 ... 210 W HV halogen lamps: 20 ... 210 W Electronic transformers: 20 ... 210 W Electronic transformers with LV LED: typical 20 ... 60 W Inductive transformers: 20 ... 210 VA Inductive transformers with LV LED: typical 20 ... 60 VA Dimmable HV LED lamps: typical 3 ... 60 W Dimmable compact fluorescent lamps: typical 3 ... 60 W With setting "LED trailing edge phase control" the max. connection power for HV LED lamps and electronic transformers with LV LED doubles. Ohmic-capacitive: 20 ... 210 W Capacitive-inductive: not permitted Ohmic-inductive: 20 ... 210 VA Ohmic and HV LED: typical 3 ... 60 W Ohmic and CFL: typical 3 ... 60 W Amplifiers: see instructions for amplifier Connection: screw terminals single wire: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2 stranded without ferrule: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2 stranded with ferrule: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 1.5 mm2 Total length power cable: max. 100 m Manufacturer: JUNG Ref.-no.: 1710 DE
Technical data
ETIM class: Dimmer (EC000025)
Model/type
- Assembly arrangement
- Basic element
- Number of modules (module system)
- -
- Number of units
- 1
- Type of load
- Universal
Setting/control
- Method of operation
- Push button
- App control via Bluetooth
- No
Options
- Dimming phase cut-on (leading edge)
- Yes
- Dimming phase cut-off (trailing edge)
- Yes
- Serial dimmer
- No
- Light value memory
- Yes
- Applicable with button
- Yes
- Applicable with movement sensor
- Yes
- Applicable with presence indicator
- Yes
- Applicable with time switch/timer
- Yes
- Applicable with transmission button
- Yes
- Applicable with infrared button
- No
- IFTTT support available
- No
Connection
- Substation input
- No
- Min. brightness controllable
- Yes
- Connection type
- Screwed terminal
- Core cross section
- 0.5, 4.0 mm²
Mounting/installation
- Mounting method
- Flush-mounted
- Type of fastening
- Mounting with claw and screw
Material
- Material
- -
- Material quality
- -
- Halogen free
- Yes
- Surface protection
- -
- Surface finishing
- -
Colour
- Colour
- -
- RAL-number (similar)
- -
- Transparent
- -
Protection
- Suitable for degree of protection (IP)
- -
Other
- Impact strength
- -
- Frequency
- 50.0, 60.0 Hz
Performance
- Nominal power
- 20.0, 210.0
Electrical
- Nominal voltage
- 230.0, 230.0 V
- Control voltage
- - V
- Nominal power resistive load
- - W
- Nominal power inductive load
- - VA
- Nominal power capacitive load
- - VA
- Max. switching power LED
- - W
- Power consumption
- 2.0 W
Measurements
- Device width
- - mm
- Device height
- - mm
- Device depth
- - mm
- Min. depth of built-in installation box
- - mm
Communication
- Compatible with Apple HomeKit
- No
- Compatible with Google Assistant
- No
- Compatible with Amazon Alexa
- No
Logistics
- Net weight
- 0.075 kg
- Country of origin
- Germany
- Customs tariff number
- 85365080
Packaging
| Pack | Quantity | GTIN | Gross weight | Dimensions (L × W × D) |
|---|---|---|---|---|
| packet | 10 | — | 1.112 kg | 220 × 170 × 87 mm |
| carton | 100 | — | 11.32 kg | 460 × 360 × 245 mm |
| PF | 1,200 | — | 157.84 kg | 1,200 × 800 × 1,200 mm |