Skip to content
Eltracore

Jung

Universal touch dimmer insert LED, with satellite input, Flush mounted (plaster)

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

with satellite input for covers ref.-no.: .. 1700 .., .. 1701 .., .. 1750 D .., .. 1751 BT .., .. 17180 .., .. 17280 .., .. 17181 .., .. 17281 .., DWPM 17360 .. Intended use Switching and dimming of lighting Operation with suitable cover of the LB Management Installation in flush box according to DIN 49073   Product characteristics Device works according to the leading edge phase control or trailing edge phase control principle Automatic or manual setting of the dimming principle suitable for the load Display of the set operating mode by means of LED Device can be operated without neutral conductor Switch-on via bulb-preserving soft start Switch-on with last brightness or saved switch-on brightness Switch-on brightness can be saved permanently Minimum brightness can be saved permanently Connection of satellite units possible Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest Electronic over-temperature protection Test operation for functional test Key card function Power extension possible by means of power boosters (ref.-no. ULZ 1755 REG) Optional accessory: compensation module LED, ref.-no.: KM LED 230 U

Tender text

Universal touch dimmer insert LED Universal touch dimmer insert LED Intended use ■ Switching and dimming of lighting ■ Operation with suitable cover of the LB Management ■ Installation in flush box according to DIN 49073 Product characteristics ■ Device works according to the leading edge phase control or trailing edge phase control principle ■ Automatic or manual setting of the dimming principle suitable for the load ■ Display of the set operating mode by means of LED ■ Device can be operated without neutral conductor ■ Switch-on via bulb-preserving soft start ■ Switch-on with last brightness or saved switch-on brightness ■ Switch-on brightness can be saved permanently ■ Minimum brightness can be saved permanently ■ Connection of satellite units possible ■ Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest ■ Electronic over-temperature protection ■ Test operation for functional test ■ Key card function ■ Power extension possible by means of power boosters (ref.-no. ULZ 1755 REG) ■ Optional accessory: compensation module LED, ref.-no.: KM LED 230 U Technical data Rated voltage: AC 230 V ~ Mains frequency: 50/60 Hz Stand-by power depending on the cover: approx. 0.1 ... 0.5 W Power loss: approx. 4 W Ambient temperature: −5 ... +45 °C Connected load at 25 °C Incandescent lamps: 20 ... 420 W HV halogen lamps: 20 ... 420 W Electronic transformers: 20 ... 420 W Electronic transformers with LV LED: typical 20 ... 100 W Inductive transformers: 20 ... 420 VA Inductive transformers with LV LED: typical 20 ... 100 VA Dimmable HV LED lamps: typical 3 ... 100 W Dimmable compact fluorescent lamps: typical 3 ... 100 W Operating mode LED trailing edge phase control: Rated power for HV LED lamps, typ. 3 ... 400 W, electronic transformers with LV LED typ. 20 ... 200 W. Ohmic-capacitive: 20 ... 420 W Capacitive-inductive: not permitted Ohmic-inductive: 20 ... 420 VA Ohmic and HV LED: typical 3 ... 100 W Ohmic and CFL: typical 3 ... 100 W Amplifiers: see instructions for amplifier Connection: screw terminals single wire: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2 stranded without ferrule: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 2.5 mm2 stranded with ferrule: 1 x 0.5 ... 4.0 mm2 2 x 0.5 ... 1.5 mm2 Number of satellite units Satellite insert 2-wire 1720 NE: unlimited Satellite insert 3-wire 1723 NE: 10 Rotary satellite insert 3-wire 1733 DNE: 10 Push-buttons: unlimited Total length of extension unit cable: max. 100 m Total length power cable: max. 100 m Approvals: VDE Manufacturer: JUNG Ref.-no.: 1711 DE

Technical data

ETIM class: Dimmer (EC000025)

Model/type

Assembly arrangement
Basic element
Number of modules (module system)
-
Number of units
1
Type of load
Universal

Setting/control

Method of operation
Push button
App control via Bluetooth
No

Options

Dimming phase cut-on (leading edge)
Yes
Dimming phase cut-off (trailing edge)
Yes
Serial dimmer
No
Light value memory
Yes
Applicable with button
Yes
Applicable with movement sensor
Yes
Applicable with presence indicator
Yes
Applicable with time switch/timer
Yes
Applicable with transmission button
Yes
Applicable with infrared button
No
IFTTT support available
No

Connection

Substation input
Yes
Min. brightness controllable
Yes
Connection type
Screwed terminal
Core cross section
0.5, 4.0 mm²

Mounting/installation

Mounting method
Flush-mounted
Type of fastening
Mounting with claw and screw

Material

Material
-
Material quality
-
Halogen free
Yes
Surface protection
-
Surface finishing
-

Colour

Colour
-
RAL-number (similar)
-
Transparent
-

Protection

Suitable for degree of protection (IP)
-

Other

Impact strength
-
Frequency
50.0, 60.0 Hz

Performance

Nominal power
20.0, 420.0

Electrical

Nominal voltage
230.0, 230.0 V
Control voltage
- V
Nominal power resistive load
- W
Nominal power inductive load
- VA
Nominal power capacitive load
- VA
Max. switching power LED
- W
Power consumption
4.0 W

Measurements

Device width
- mm
Device height
- mm
Device depth
- mm
Min. depth of built-in installation box
- mm

Communication

Compatible with Apple HomeKit
No
Compatible with Google Assistant
No
Compatible with Amazon Alexa
No

Logistics

Net weight
0.075 kg
Country of origin
Germany
Customs tariff number
85365080

Packaging

PackQuantityGTINGross weightDimensions (L × W × D)
packet10—1.112 kg220 × 170 × 87 mm
carton100—11.32 kg460 × 360 × 245 mm
PF1,200—169.16 kg1,200 × 800 × 1,550 mm

Documents