DALI gateway TW
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
Rail mounting device, 4 rail units with manual electronic operation and LED status indication ETS product family: Illumination Product type: Dimmer Available November 2020 Intended use Controlling of luminaires and other applications with DALI operating device in KNX installations e.g. electronic ballast Mounting on DIN rail according to EN 60715 in distribution boxes Product characteristics Control of up to 64 DALI devices in up to 32 groups Setting of colour temperature for luminaires with DALI Device Type 8 for tunable white acc. to IEC 62386-209 compatible with DALI-2 acc. to IEC 62386 Suitable for operation in emergency lighting systems Individual, group or central addressing 16 light scenes Effect control for dynamic lighting effects or colour games Read out DALI device state via KNX, e.g. brightness or luminaire error Manual operation of the DALI groups Restraint function Feedback of switching state and brightness value in bus and manual mode Collective feedback Central switching function Disabling function for each DALI group Separate ON and OFF delay Staircase lighting timer with pre-warning function Corridor function: when combined with motion detectors, reduced continuous lighting, if no motion is detected Online or offline project design of the DALI devices with ETS plug-in Short-circuit protection Surge voltage protection Overload protection Operating hours counter Signal of the global switching status of the DALI devices, e.g. to switch off the mains voltage of the DALI devices to avoid standby losses An individual DALI device can be exchanged during operation without software Linear or logarithmic dimming characteristic can be selected
Tender text
DALI gateway TW KNX DALI gateway TW Intended use ■ Controlling of luminaires and other applications with DALI operating device in KNX installations e.g. electronic ballast ■ Mounting on DIN rail according to EN 60715 in distribution boxes Product characteristics ■ Control of up to 64 DALI devices in up to 32 groups ■ Setting of colour temperature for luminaires with DALI Device Type 8 for tunable white acc. to IEC 62386-209 ■ compatible with DALI-2 acc. to IEC 62386 ■ Suitable for operation in emergency lighting systems ■ Individual, group or central addressing ■ 16 light scenes ■ Effect control for dynamic lighting effects or colour games ■ Read out DALI device state via KNX, e.g. brightness or luminaire error ■ Manual operation of the DALI groups ■ Restraint function ■ Feedback of switching state and brightness value in bus and manual mode ■ Collective feedback ■ Central switching function ■ Disabling function for each DALI group ■ Separate ON and OFF delay ■ Staircase lighting timer with pre-warning function ■ Corridor function: when combined with motion detectors, reduced continuous lighting, if no motion is detected ■ Online or offline project design of the DALI devices with ETS plug-in ■ Short-circuit protection ■ Surge voltage protection ■ Overload protection ■ Operating hours counter ■ Signal of the global switching status of the DALI devices, e.g. to switch off the mains voltage of the DALI devices to avoid standby losses ■ An individual DALI device can be exchanged during operation without software ■ Linear or logarithmic dimming characteristic can be selected Technical data Rated voltage: AC 110 ... 240 V ~, 50/60 Hz Rated voltage: DC 110 ... 240 V Power loss: max. 3 W Ambient temperature: −5 ... +45 °C Storage/transport temperature: −25 ... +70 °C Rated voltage DALI: DC 16 V Number of DALI devices: max. 64 DALI transmission rate: 1.2 kbit/s DALI protocol: EN 62386 Cable type: Sheathed cable 230 V, e,g. NYM Cable length DALI with 1.5 mm2: max. 300 m with 1.0 mm2: max. 238 m with 0.75 mm2: max. 174 m with 0.5 mm2: max. 116 m Mounting width: 72 mm (4 rail units) Connection, power supply and DALI Connection mode: screw terminals single wire: 1 x 0.5 ... 4 mm2 stranded without ferrule: 1 x 0.5 ... 4 mm2 stranded with ferrule: 1 x 0.5 ... 2.5 mm2 KNX medium: TP 256 Rated voltage KNX: DC 21 ... 32 V SELV Power consumption KNX: typical 150 mW Connection, KNX: terminal Manufacturer: JUNG Ref.-no.: 2099 REGHE
Technical data
ETIM class: System interface/media gateway for bus system (EC001099)
Communication
- Bus system KNX
- Yes
- Bus system KNX-RF (Radio Frequency)
- No
- Bus system KNX Secure
- No
- Bus system KNX Secure-RF (Radio Frequency)
- No
- Bus system radio frequency
- No
- Bus system LON
- No
- Bus system Powernet
- No
- Other bus systems
- -
- Protocol
- -
- Radio interface
- -
- IR interface
- No
Options
- Radio frequency bidirectional
- -
- Updateable
- -
- Provider dependent
- -
- Visualization
- -
Model/type
- Model
- Light system interface/DALI
- Number of channels
- -
- Demounting protection
- -
- With LED indication
- Yes
- Web-Server
- -
Mounting/installation
- Mounting method
- DRA (DIN-rail adaptor)
Measurements
- Width in number of modular spacings
- 4
Electrical
- Operating voltage
- 240
- Operating voltage
- - V
- Voltage type
- -
- Power consumption
- - W
Other
- Max. number of devices per channel
- -
Protection
- Degree of protection (IP)
- -
Logistics
- Net weight
- 0.156 kg
- Country of origin
- Germany
- Customs tariff number
- 85176200
Packaging
| Pack | Quantity | GTIN | Gross weight | Dimensions (L × W × D) |
|---|---|---|---|---|
| packet | 1 | — | 0.19 kg | 100 × 78 × 100 mm |