Binary input, 8-gang
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
Rail mounting device, 4 rail units 8 inputs 12 ... 48 V AC/DC Auxiliary voltage output DC 24 V (SELV) for polling potential-free contacts with status indicator ETS product family: Input Product type: Binary input Intended use Polling of conventional switching or push-button contacts, glass break detectors etc. in KNX systems, for reporting of states, operation of loads, etc. Mounting on DIN rail according to EN 60715 in distribution boxes Product characteristics Status LED for each input Detection of voltage levels and changes on the input Transmitting the input state to the bus Transmission behaviour freely settable Functions: switching, dimming, blinds up/down, brightness values, temperatures, calling up and saving scenes Inputs can be disabled separately External AC and DC voltages can be connected Auxiliary voltage output for polling potential-free contacts No separate power supply required Separate reference potentials for inputs Pulse counter (firmware version V02 or higher), also suitable for S0 pulses
Tender text
Binary input 8-gang, 24 V KNX binary input, 8-gang Intended use ■ Polling of conventional switching or push-button contacts, glass break detectors etc. in KNX systems, for reporting of states, operation of loads, etc. ■ Mounting on DIN rail according to EN 60715 in distribution boxes Product characteristics ■ Status LED for each input ■ Detection of voltage levels and changes on the input ■ Transmitting the input state to the bus ■ Transmission behaviour freely settable ■ Functions: switching, dimming, blinds up/down, brightness values, temperatures, calling up and saving scenes ■ Inputs can be disabled separately ■ External AC and DC voltages can be connected ■ Auxiliary voltage output for polling potential-free contacts ■ No separate power supply required ■ Separate reference potentials for inputs ■ Pulse counter (firmware version V02 or higher), also suitable for S0 pulses Technical data Rated voltage KNX: DC 21 ... 32 V SELV Power consumption KNX: max. 350 mW Stand-by: max. 200 mW Connection, KNX: terminal Ambient temperature: −5 ... +45 °C Storage/transport temperature: −25 ... +70 °C Inputs Rated voltage: AC/DC 12 ... 48 V Signal level "0" signal: AC/DC −48 ... +2 V Signal level "1" signal: AC/DC 8 ... 48 V Input current at rated voltage Input current: 2 mA Signal duration: min. 30 ms Rated frequency AC signal: 30 ... 60 Hz Number of contacts per input NO contacts: unlimited NC contacts: max. 20 Output voltage: DC 24 V SELV Mounting width: 72 mm (4 rail units) Stand-by power: max. 200 mW Power loss: max. 1 W Connection Connection mode: screw terminals single wire: 1 x 0.2 ... 4 mm2 stranded without ferrule: 1 x 0.34 ... 4 mm2 stranded with ferrule: 1 x 0.14 ... 2.5 mm2 Cable length: max. 100 m Manufacturer: JUNG Ref.-no.: 2128 REG
Technical data
ETIM class: Binary input for bus system (EC000688)
Communication
- Bus system KNX
- Yes
- Bus system KNX-RF (Radio Frequency)
- No
- Bus system KNX Secure
- No
- Bus system KNX Secure-RF (Radio Frequency)
- No
- Bus system radio frequency
- No
- Bus system LON
- No
- Bus system Powernet
- No
- Other bus systems
- -
Options
- Radio frequency bidirectional
- -
- Bus module detachable
- -
Mounting/installation
- Mounting method
- DRA (DIN-rail adaptor)
Measurements
- Width in number of modular spacings
- 4
- Min. depth of built-in installation box
- - mm
Connection
- With bus connection
- Yes
- Number of inputs
- 8
Setting/control
- LED controlling
- No
Model/type
- With LED indication
- Yes
Electrical
- Input voltage
- 12.0, 48.0 V
- Power consumption
- 0.35 W
- Type of voltage (input voltage)
- AC/DC
Operating conditions
- External signal voltage necessary
- -
Protection
- Degree of protection (IP)
- -
Logistics
- Net weight
- 0.183 kg
- Country of origin
- Germany
- Customs tariff number
- 85176200
Packaging
| Pack | Quantity | GTIN | Gross weight | Dimensions (L × W × D) |
|---|---|---|---|---|
| packet | 1 | — | 0.218 kg | 95 × 96 × 77 mm |