Skip to content
Eltracore
No photo yet

Jung

Push-button controller, AC 230 V ~, 50 Hz

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

for dimming of fluorescent lamps controlled by electronic ballasts or electronic transformers with control voltage 1 – 10 V operation by push-buttons (NO contact), e.g. ref.-no. 531 U   Intended use Brightness setting for lamp operating devices with 1-10 V interface Installation in false ceilings or surface mounting   Product characteristics The light bulb is switched on and off via the load cable and dimmed via the 1-10 V interface Operation via installation button, NO contact Can be switched to memory function with brightness memory The 1-10 V interface is short-circuit proof for the control current

Tender text

Push-button controller, built-in Push-button controller, built-in operation by push-buttons (NO contact), e.g. ref.-no. 531 U Intended use ■ Brightness setting for lamp operating devices with 1-10 V interface ■ Installation in false ceilings or surface mounting Product characteristics ■ The light bulb is switched on and off via the load cable and dimmed via the 1-10 V interface ■ Operation via installation button, NO contact ■ Can be switched to memory function with brightness memory ■ The 1-10 V interface is short-circuit proof for the control current Technical data Rated voltage: AC 230 V ~, 50 Hz Switch contact: relay, mains potential Switching capacity Ohmic load: 2,300 W Electronic ballast, transformer: depending on type Control current of electronic ballast: max. 200 mA Short-circuit protection: line circuit breaker, max. 10 A Electrical isolation: 2 kV basic insulation Ambient temperature: max. 50 °C No-load protection: yes Connection mode: screw terminals single wire: max. 4 mm2 stranded without ferrule: max. 2.5 mm2 stranded with ferrule: max. 1.5 mm2 Dimensions (W x H x D): 175 x 42 x 18 mm Manufacturer: JUNG Ref.-no.: 240-10 EB

Technical data

ETIM class: Controller for light controlling system (EC000534)

Mounting/installation

Mounting method
Built-in installation

Electrical

Control current
200 mA
Rated current
- A
Nominal voltage
230 V

Other

Frequency
50, 50 Hz

Options

Dimming 1-10 V
Yes
Dimming DALI
No
Dimming DSI
No
Dimming Touch and Dim
No
Dimming with push-button
No
Dimming manufacturer's proprietary system
No
Light value memory
Yes
Applicable with button
Yes
Applicable with movement sensor
No
Applicable with presence indicator
No
Applicable with time switch/timer
No
Applicable with transmission button
No
Applicable with infrared button
No

Setting/control

Method of operation
Other

Connection

Substation input
-

Measurements

Min. depth of built-in installation box
- mm
Device width
175 mm
Device height
42 mm
Device depth
16 mm

Logistics

Country of origin
Germany
Customs tariff number
85365080

Packaging

PackQuantityGTINGross weightDimensions (L × W × D)
packet1—0.12 kg180 × 45 × 22 mm

Documents