Electronic potentiometer, with push-button function
- Manufacturer part no.
- EAN
Ordering
- Order unit
- piece
Description
for dimming of fluorescent lamps controlled by electronic ballasts or electronic transformers with control voltage 1 – 10 V switching capacity of mains push-button: AC 230 V ~ 50/60 Hz, max. 2 A for resistive loads Intended use Switching and brightness adjustment for lamps with operating devices with 1-10 V interface Installation in appliance box according to DIN 49073 Product characteristics Potentiometer with switching function for direct switching of ohmic or inductive loads Potentiometer with push-button function only in connection with pulse relays Basic brightness adjustable For potentiometers with a push-button function, switching via extensions is possible Protection of the 1-10 V interface in case of incorrect connection by means of integrated fine-wire fuse
Tender text
Electronic potentiometer, push-button function Electronic potentiometer, 1 – 10 V switching capacity of mains push-button: AC 230 V ~ 50/60 Hz, max. 2 A for resistive loads Intended use ■ Switching and brightness adjustment for lamps with operating devices with 1-10 V interface ■ Installation in appliance box according to DIN 49073 Product characteristics ■ Potentiometer with switching function for direct switching of ohmic or inductive loads ■ Potentiometer with push-button function only in connection with pulse relays ■ Basic brightness adjustable ■ For potentiometers with a push-button function, switching via extensions is possible ■ Protection of the 1-10 V interface in case of incorrect connection by means of integrated fine-wire fuse Technical data Control voltage: 0.7 ... 12 V Control current: max. 50 mA Fuse, type: F 0.5 A H 250 V Connection: screw terminals Terminals for: 2 x 2.5 mm2 or 1 x 4 mm2 Control cable: Type, cross-section and laying for 250 V lines (control voltage with basic insulation). Control and load wires may share a common cable, e.g. NYM J 5 x 1.5 mm2 . Approvals: VDE Version: with push-button function Manufacturer: JUNG Ref.-no.: 240-31
Technical data
ETIM class: Controller for light controlling system (EC000534)
Mounting/installation
- Mounting method
- Flush-mounted
Electrical
- Control current
- 50 mA
- Rated current
- 2 A
- Nominal voltage
- 230 V
Other
- Frequency
- - Hz
Options
- Dimming 1-10 V
- Yes
- Dimming DALI
- No
- Dimming DSI
- No
- Dimming Touch and Dim
- No
- Dimming with push-button
- No
- Dimming manufacturer's proprietary system
- No
- Light value memory
- No
- Applicable with button
- No
- Applicable with movement sensor
- No
- Applicable with presence indicator
- No
- Applicable with time switch/timer
- No
- Applicable with transmission button
- No
- Applicable with infrared button
- No
Setting/control
- Method of operation
- Turn/push button
Connection
- Substation input
- Yes
Measurements
- Min. depth of built-in installation box
- - mm
- Device width
- - mm
- Device height
- - mm
- Device depth
- - mm
Logistics
- Country of origin
- Germany
- Customs tariff number
- 85334090
Packaging
| Pack | Quantity | GTIN | Gross weight | Dimensions (L × W × D) |
|---|---|---|---|---|
| packet | 10 | — | 0.905 kg | 357 × 170 × 85 mm |