Skip to content
Eltracore
No photo yet

Jung

Flush-mounted room climate interface with satellite input

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

3 binary inputs 1 blinds output, 1 output "TRIAC" (heating) Intended use Switching of electrically-driven blinds, awnings and similar blinds for AC 230 V mains voltage Switching of electrothermal actuators Installation in flush box according to DIN 49073 Connection with enclosed terminals   Product characteristics Control of blinds, awnings and similar blinds Control of electrothermal actuators Three binary inputs for potential-free contacts, usable as extension inputs for local operation Supply via bus, no additional power supply necessary   Blinds function Blind/shutter position directly controllable Slat position directly controllable Feedback of movement status, blind/shutter position and slat position Forced position through higher-level controller Safety function: rain alarm, frost alarm, 3 independent wind alarms Sun protection function   Function of valve drives Switching operation or PWM operation Actuators with characteristics "normally open" or "normally closed" can be controlled Overload-protected, short circuit-protected Protection against jamming valves Forced position Cyclical monitoring of the input signals can be parameterised   PWM operation: electrothermal actuators only have the positions Open and Closed. In PWM operation, switch-on and switch-off during the drive’s cycle time achieves an almost constant behaviour.

Tender text

Flush-mounted room climate interface with satellite input Flush-mounted KNX room climate interface with satellite input Intended use ■ Switching of electrically-driven blinds, awnings and similar blinds for AC 230 V mains voltage ■ Switching of electrothermal actuators ■ Installation in flush box according to DIN 49073 ■ Connection with enclosed terminals Product characteristics ■ Control of blinds, awnings and similar blinds ■ Control of electrothermal actuators ■ Three binary inputs for potential-free contacts, usable as extension inputs for local operation ■ Supply via bus, no additional power supply necessary Blinds function ■ Blind/shutter position directly controllable ■ Slat position directly controllable ■ Feedback of movement status, blind/shutter position and slat position ■ Forced position through higher-level controller ■ Safety function: rain alarm, frost alarm, 3 independent wind alarms ■ Sun protection function Function of valve drives ■ Switching operation or PWM operation ■ Actuators with characteristics "normally open" or "normally closed" can be controlled ■ Overload-protected, short circuit-protected ■ Protection against jamming valves ■ Forced position ■ Cyclical monitoring of the input signals can be parameterised PWM operation: electrothermal actuators only have the positions Open and Closed. In PWM operation, switch-on and switch-off during the drive’s cycle time achieves an almost constant behaviour. Technical data Rated voltage: AC 230/240 V ~, 50/60 Hz Switching voltage: AC 250 V ~ Ambient temperature: −5 ... +45 °C Storage/transport temperature: −25 ... +70 °C Blinds output Contact type: µ Switching current AC1 (cos φ > 0.8): 3 A Min. switching current AC: 100 mA Motors (230 V): 600 VA Heating output Contact type: semiconductor (triac), ε Switching current: 5 ... 25 mA Switch-on current: max. 600 mA (2 s) Number of drives per output: max. 2 Control cable Cable type: YY6x0.6 Input type: floating contact Total cable length: max. 5 m Voltage satellite inputs: approx. 5 V Dimensions (Ø x H): 53 x 28 mm Connection: screwles terminals single wire: 1 x 1 ... 2.5 mm2 KNX supply: DC 21 ... 32 V SELV Power consumption KNX: max. 240 mW Connection, KNX: terminal Approvals: VDE Manufacturer: JUNG Ref.-no.: 2531 UP

Technical data

ETIM class: Shutting actuator for bus system (EC001330)

Communication

Bus system KNX
Yes
Bus system KNX-RF (Radio Frequency)
No
Bus system radio frequency
No
Bus system LON
No
Bus system Powernet
No
Other bus systems
-

Options

Radio frequency bidirectional
-
Bus module detachable
-

Mounting/installation

Mounting method
Flush-mounted

Measurements

Width in number of modular spacings
-
Min. depth of built-in installation box
- mm

Connection

With bus connection
Yes
Number of inputs
3

Setting/control

Local operation/hand operation
No

Model/type

With LED indication
No
With switch function
-
Type of current
AC

Electrical

Switching current (resistive)
3 A
Max. switching power
600 W

Other

Max. number of venetian-blind outputs
1

Protection

Degree of protection (IP)
-

Logistics

Country of origin
Germany
Customs tariff number
85364900

Packaging

PackQuantityGTINGross weightDimensions (L × W × D)
packet1—0.119 kg82 × 82 × 67 mm
carton10—1.321 kg357 × 170 × 85 mm

Documents