Skip to content
Eltracore
No photo yet

Jung

Speed regulator

Manufacturer part no.
EAN
Price on requestAsk us for a quote for this product.

Ordering

Order unit
piece

Description

Screwless terminals for wires up to 2.5 mm2 Intended use Speed controller for speed control of single-phase motors such as induction, shaded-pole or universal motors Installation in appliance box according to DIN 49073   Product characteristics Short-circuit protection through fine-wire fuse Electronic overtemperature protection Switching output e.g. for ohmic loads or for activating ventilation openings. The maximum load capacity of the switching output depends on the motor current. By reducing the motor current it is possible to switch slats or ohmic loads with higher current consumption. Measuring points make it possible to check the connected voltages without dismantling the speed controller. Dimensions 75 x 90 x 58 mm, 2 inlets Approvals: VDE

Tender text

Speed regulator Speed regulator Intended use ■ Speed controller for speed control of single-phase motors such as induction, shaded-pole or universal motors ■ Installation in appliance box according to DIN 49073 Product characteristics ■ Short-circuit protection through fine-wire fuse ■ Electronic overtemperature protection ■ Switching output e.g. for ohmic loads or for activating ventilation openings. The maximum load capacity of the switching output depends on the motor current. By reducing the motor current it is possible to switch slats or ohmic loads with higher current consumption. ■ Measuring points make it possible to check the connected voltages without dismantling the speed controller. ■ Dimensions 75 x 90 x 58 mm, 2 inlets ■ Approvals: VDE Protection level IP 44 is ensured. Version: for motors 0.1 A ... 2 A Manufacturer: JUNG Ref.-no.: 844.20 W

Technical data

ETIM class: Speed controller (EC000256)

Mounting/installation

Mounting method
Surface mounted

Colour

Colour
Other
RAL-number
7035

Electrical

Nominal current
2.1 A
Output voltage
230, 240 V
Number of phases
1

Setting/control

Power control stepless
Yes
Number of steps
-
Method of operation
Turn button

Options

Basic element without cover
No
Switching contact
-

Model/type

Lighting
None
With temperature sensor
-

Measurements

Height
90 mm
Width
75 mm
Depth
58 mm

Protection

Degree of protection (IP)
IP44

Logistics

Country of origin
Germany
Customs tariff number
85365080

Packaging

PackQuantityGTINGross weightDimensions (L × W × D)
packet1—0.283 kg110 × 85 × 85 mm

Documents