ET 200SP e-starter basic, 0.1 - 2.0 A
- Manufacturer part no.
- EAN
- Series
- SIMATIC ET 200SP
Ordering
- Order unit
- piece
Description
SIMATIC ET 200SP e-Starter basic, 0.1 - 2.0 A reversing starter electronic short-circuit protection e-Starter SIMATIC ET 200SP for functional switching and protecting of three-phase motors and resistive loads, with electronic short-circuit and overload protection. The multifunctional e-starters are fully integrated in the ET 200SP distributed I/O system. The fast and comprehensive configuration takes place in the TIA Portal. Thanks to extremely fast, fully electronic control, the devices are short-circuit-proof, low-wear, and extremely durable. Thanks to the wide setting range and the integrated reversing functionality, there is less variety of devices, which means reduced costs for stocks of spare parts and configuration. The slim design saves space in the control cabinet. Easy installation by means of a wiring bus and plug-in technology enables fast commissioning and increases the availability of the plant. The devices are approved for worldwide use (e.g. IEC, CCC, and cULus) and are IE3/IE4-ready. Available as a reversing starter with two different motor current ranges from 0.1 - 2A and from 0.7 - 7A. ABaseUnit is necessary for operation of the ET 200SP e-starter. Optionally, a 4DI (LC) submodule can be snapped on, in order to establish manual local control with four additional digital inputs. The ET 200SP distributed I/O system supersedes the tried and tested ET 200S system. ET 200SP e-Starter - Flexible. Powerful. Reliable.
Technical data
ETIM class: Motor starter/motor starter combination (EC001037)
Model/type
- Type of motor starter
- Reversing starter
- With short-circuit release
- Yes
- With transformer
- No
- Number of command positions
- UN
- Number of indicator lights
- UN
- With fuse
- No
Electrical
- Rated control supply voltage AC 50 Hz
- UN V
- Rated control supply voltage AC 60 Hz
- UN V
- Rated control supply voltage DC
- 20.4, 28.8 V
- Voltage type for actuating
- DC
- Rated operation power at AC-3, 230 V, 3-phase
- 0.46 kW
- Rated operation power at AC-3, 400 V
- 0.75 kW
- Rated power, 460 V, 60 Hz, 3-phase
- UN kW
- Rated power, 575 V, 60 Hz, 3-phase
- UN kW
- Rated operation current Ie
- 2 A
- Rated operation current at AC-3, 400 V
- 2 A
- Overload release current setting
- 0.1, 2 A
- Rated conditional short-circuit current, type 1, 480 Y/277 V
- 100000 A
- Rated conditional short-circuit current, type 1, 600 Y/347 V
- UN A
- Rated conditional short-circuit current, type 2, 230 V
- 100000 A
- Rated conditional short-circuit current, type 2, 400 V
- 100000 A
- Power consumption
- UN W
Connection
- Number of auxiliary contacts as normally open contact
- 0
- Number of auxiliary contacts as normally closed contact
- 0
- Type of electrical connection of main circuit
- Plug-in connection
- Type of electrical connection for auxiliary- and control current circuit
- Plug-in connection
Operating conditions
- Ambient temperature, upper operating limit
- 40 °C
Options
- Temperature compensated overload protection
- Yes
- External reset possible
- Yes
Other
- Release class
- CLASS 10 A
Mounting/installation
- Suitable for rail mounting
- Yes
Application
- Suitable for emergency stop
- No
Approval/certification
- Coordination class according to IEC 60947-4-3
- UN
Protection
- Degree of protection (IP)
- IP20
- Degree of protection (NEMA)
- 1
Communication
- Supporting protocol for TCP/IP
- No
- Supporting protocol for PROFIBUS
- No
- Supporting protocol for CAN
- No
- Supporting protocol for INTERBUS
- No
- Supporting protocol for ASI
- No
- Supporting protocol for Modbus
- No
- Supporting protocol for Data-Highway
- No
- Supporting protocol for DeviceNet
- No
- Supporting protocol for SUCONET
- No
- Supporting protocol for LON
- No
- Supporting protocol for PROFINET IO
- Yes
- Supporting protocol for PROFINET CBA
- No
- Supporting protocol for SERCOS
- No
- Supporting protocol for Foundation Fieldbus
- No
- Supporting protocol for EtherNet/IP
- Yes
- Supporting protocol for AS-Interface Safety at Work
- No
- Supporting protocol for DeviceNet Safety
- No
- Supporting protocol for INTERBUS-Safety
- No
- Supporting protocol for PROFIsafe
- No
- Supporting protocol for SafetyBUS p
- No
- Supporting protocol for other bus systems
- No
Measurements
- Width
- 30 mm
- Height
- 151 mm
- Depth
- 167 mm
Logistics
- Net weight
- 0.655 kg
- Country of origin
- Germany
- Customs tariff number
- 85371098
Packaging
| Pack | Quantity | GTIN | Gross weight | Dimensions (L × W × D) |
|---|---|---|---|---|
| packet | 1 | 4047621120010 | 0.655 kg | 190 × 73 × 170 mm |