SIMOCODE pro V basic unit, PROFIBUS DP interface 12 Mbps, RS 485, 4 I/3 O, coated printed circuit boards
- Manufacturer part no.
- EAN
- Series
- SIRIUS SIMOCODE pro V
Ordering
- Order unit
- piece
Description
basic device SIMOCODE pro V PB, PROFIBUS DP interface 12 Mbps, RS-485, 4 I/3 O freely configurable, Us: 110...240 V AC/DC, input for thermistor connection monostable relay outputs, with painted printed circuit boards, expandable by expansion modules SIMOCODE pro V . The variable and intelligent motor management system offers the possibility of implementing a large number of control functions, e.g. for pole-changing starters or positioner control, and functions independently of the automation system. In interaction with various expansion modules, it provides an extensive range of inputs/outputs, voltage and power recording, fail-safe disconnection of motors, precise ground-fault detection via the 3UL23 residual-current transformers, analog value monitoring and temperature measurement. Depending on the version, a wide variety of communication interfaces such as PROFIBUS, PROFINET, OPC UA, Modbus RTU or EtherNet/IP are possible. The system supplies detailed operational, service and diagnostics data - at any time or place. Worldwide approvals (e.g. IEC and UL/CSA), also for applications in hazardous areas (ATEX or IEC Ex) are available. Deployment with IE3/IE4 motors is supported. The SIMOCODE ES (TIA Portal) software is available for the configuration, commissioning, operation and diagnostics of SIMOCODE pro. The SIMOCODE pro block library for SIMATIC PCS 7 is used for the simple integration of SIMOCODE pro into the SIMATIC PCS 7 process control system. The SIMOCODE pro V basic units are available with 24 V DC or 110-240 V AC/DC control supply voltage. The operation requires at least one current/voltage measuring module and a matching 3UF793 connecting cable. These optional operator panels with or without a display, as well as various expansion modules, areavailable separately. Take a step into the future with SIMOCODE.
Technical data
ETIM class: Motor management device (EC002572)
Connection
- Type of connection system
- UN
- Number of analogue inputs
- UN
- Number of analogue outputs
- UN
- Number of outputs, with contact
- 3
- Number of electronic outputs
- 0
- Number of digital inputs
- 4
- Input for thermistor connection
- Yes
- Input for earth fault detection
- No
- Input for analogue temperature sensor
- UN
- Type of electrical connection for auxiliary- and control current circuit
- Screw connection
Electrical
- Voltage type (supply voltage)
- UN
- Supply voltage AC 50 Hz
- UN V
- Supply voltage AC 60 Hz
- UN V
- Supply voltage DC
- UN V
- Rated voltage Ue at AC 50 Hz
- UN V
- Rated voltage Ue at AC 60 Hz
- UN V
- Rated voltage Ue at DC
- UN V
- Rated operation current Ie
- UN A
- Type of voltage measuring range
- UN
- Voltage measuring range
- UN V
Other
- Rated operating frequency
- UN Hz
Options
- Current detection module
- Yes
- Voltage detection module
- Yes
Model/type
- Switching function
- Mono stable
Communication
- Type of interface
- UN
Protection
- Degree of protection (IP)
- IP20
- Degree of protection (NEMA)
- UN
Measurements
- Width
- UN mm
- Height
- UN mm
- Depth
- UN mm
Logistics
- Net weight
- 0.374 kg
- Country of origin
- Germany
- Customs tariff number
- 85371098
Packaging
| Pack | Quantity | GTIN | Gross weight | Dimensions (L × W × D) |
|---|---|---|---|---|
| packet | 1 | 4047621077963 | 0.374 kg | 133 × 210 × 58 mm |